Emboss Tape ACHF CONNECTOR 1.2mm pitch/Disconnectable Crimp style connectors Specifications ––––––––––––––––––– • Current rating: 2.5A AC, DC (AWG #28) • Voltage rating: 50V AC, DC • Temperature range: -25˚C to +85˚C (including temperature rise in applying electrical current) • Contact resistance: Initial value/ 10m Ω max. After environmental testing/ 20m Ω max. • Insulation resistance: 100M Ω min. • Withstanding voltage: 500V AC/minute • Applicable wire: Conductor size/ AWG #30 to #28 Insulation O.D./ 0.5 to 0.63mm This ACHF connector is compact and low profile type, height 1.43mm and width 4.95mm, 1.2mm pitch wire-to-board connector. • High-strength • Top entry but side feed type • Connector for power supply (2.5A) * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Connector outline Note: 1. The above figure is the figure viewed from the connector mounting side. 2. Tolerances are non-cumulative: ±0.05mm for all centers. The dimensions above should serve as a guideline. Contact JST for details. Contact Applicable wire mm2 AWG# Copper alloy, nickel-undercoated, gold-plated 0.7 RoHS compliance Crimping machine Crimp applicator

ACHF CONNECTOR Housing Dimensions (mm) A RoHS compliance Contact: Copper alloy, nickel-undercoated, gold-plated (nickel-stripe) Housing: Heat resisting resin, UL94V-0, black Reinforcement: Copper alloy, copper-undercoated, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. Note: The products listed above are supplied on embossed-tape.