ACH CONNECTOR
2Pages

Emboss Tape 1.2mm pitch/Disconnectable Crimp style connectors • Current rating: 2 A/ 1 to 3 circuits AC, DC (AWG #28) 1.5 A/ 4, 5 circuits AC, DC (AWG #28) • Voltage rating: 50 V AC, DC • Temperature range: -25˚C to +85˚C (including temperature rise in applying electrical current) • Contact resistance: Initial value/ 10 mΩ max. After environmental tests/ 20 mΩ max. • Insulation resistance: 100 MΩ min. • Withstanding voltage: 500 VAC/minute • Applicable wire: Conductor size/ AWG #32 to #28 Insulation O.D./ 0.38 to 0.63 mm This ACH connector is compact and low profile type, height 1.4mm and width 4.3mm,1.2mm pitch wire-to-board connector. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. * Compliant with RoHS. • Top entry but side feed type • Connector for DC power supply • Corresponding to sucking nozzle of pick and place machine <2, 3 circuits> Connector outline Connector outline Connector outline Note: 1. The above figure is the figure viewed from the connector mounting side. 2. Tolerances are non-cumulative: ±0.05mm for all centers. 3. The dimensions above should serve as a guideline. Contact JST for details. Contact Applicable wire mm2 AWG# Copper alloy, nickel-undercoated, gold-plated RoHS compliance Crimping machine Crimp applicator MKS-L-10-3

ACH CONNECTOR Housing Dimensions (mm) A B <2, 3 circuits> Circuit No.1 mark RoHS compliance As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. Shrouded header Circuits <2, 3 circuits> Circuit No.1 mark Contact: Copper alloy, nickel-undercoated, gold-plated (nickel-stripe) Housing: Heat resisting resin, UL94V-0, natural (ivory) Solder tab: Copper alloy, copper-undercoated, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. As the color...