RAIL-1 is GSM-R Data logger / Gateway
3Pages

{{requestButtons}}

Catalog excerpts

RAIL-1 is GSM-R Data logger / Gateway - 1

RAILWAY Data Logger GSM-R applications FEATURES  GSM-R band for the railway network  Supported interfaces: M-Bus, RS232, RS485, Current Loop, 4 x Discrete Input, GSM/GPRS, GSM-R  1 x SIM card slot  Option: Mounting set for DIN rail Current Loop  Extended temperature range -25oC … +60oC  Remote communication over GSM/GPRS or GSM-R  Galvanically isolated interfaces and power supply Data logger / gateway is designed for the GSM-R band, which is used in the railway sector. RAIL-1 data logger / gateway is dedicated for collecting the data via various devices and meters via various interfaces and various protocols and sending of the data via special Railway GSM-R (GSMR) band. The device is very universal and robust (IP65), and dedicated for railway industry. RAIL-1 can also communicate with other controllers and sensors. Device has wide range of optional interfaces and protocols and can read any kind of meters, controllers and sensors equipped with standard protocols. Perfect for telemetry/monitoring, control and smart metering in Railway industry.

Open the catalog to page 1
RAIL-1 is GSM-R Data logger / Gateway - 2

Description! data logger Flash archive storage up to 8 MB, independent data storage without power about 5 years RS232 (4 ports) distance up to 15 m, speed up to 19,2 Kbit/s RS485 (2 ports) distance up to 1,2 km, max 32 transivers, speed up to 19,2 Kbits/s M-Bus (1 port) up to 8 M-Bus devices Current Loop (2 ports) 25-27V, 14-20mA, up to 6 km, speed up to 19,2 Kbit/s GSM-R band for the railway network Discrete Input 4 sink contacts Modbus RTU, Modbus TCP/IP, IP, ICMP, UDP, TCP, DHCP, PPP, ARP, SNTP, IEC60870-5-104:2000 Interface galvanic isolation 500V Physical characteristics Mounting type...

Open the catalog to page 2
RAIL-1 is GSM-R Data logger / Gateway - 3

0 – None 1 – GSM-R 2 – RS232 3 – GPRS/GSM 0 – None 1 – RS485 2 – RS232 4 – M-Bus 5 – Current loop 0 – None 1 – RS485 2 – RS232 5 – Current loop 0 – None 2 – RS232 0 – None 1 – 4 x discrete inputs (if power supply is in the device) 2 – 4 x discrete inputs (if battery is in the device) 0 – None 1 – Supply current control 0 – None 1 – Back up battery 3 – One phase power supply 50-270 V AC 4 – Three phase power supply 5

Open the catalog to page 3

All JSC Viltrus catalogs and technical brochures