FEATURESRS232 RS485 M-Bus Data/Req Current Loop Ethernet M-Bus ^/lodbus C € > Reading data from meters (heat, water, gas, electricity...), sensors, controllers Supported interfaces: M-Bus, RS232, RS485, Current Loop, USB, Data/Req, GSM/GPRS, Ethernet, Analog IN, Discrete IN/OUT Independent data log with real time stamp Remote communication over GSM/GPRS, Ethernet Two universal (jumper switchable) interfaces Galvanically isolated interfaces and power supply Power supply for external powering of meters Memory expansion: up to 8 GB using micro SD card 8 x Analog IN 8 x Discrete IN MX-7 data logger is dedicated for real time logging and analyzing of data. Using GPRS/GSM or Ethernet, logger sends data to remote users / server. MX-7 can also communicate with other controllers and sensors. Device has wide range of optional interfaces and protocols (Modbus RTU, Modbus TCP/IP, IEC60870-5-104: 2000, etc.) and can read any kind of meters, controllers and sensors equipped with standard protocols. MX-7 can also measure and store different kinds of discrete inputs (limit switches, alarms, push buttons, relay contacts...), discrete outputs (remote management) and analog inputs (current/voltage). MX-7 data logger is ideal for smart metering, telemetry, data acquisition, remote devices control, measure and store different kinds of analog and discrete I/O applications, process monitoring. Electricity metering Controllers metering III Electricity EnergyX Flow Meter Power Meter \ Mass Flow Meter Electricity Meter PtlOO temperature sensor Pressure Measurement Meter Flow Meter

0 – None 1 – SD card socket 0 – None 1 – Real Time Clock (RTC) 0 – None 8 – 8 discrete outputs 0 – None 4 – 4 discrete inputs 8 – 8 discrete inputs 0 – None 1 – 4 analog inputs, single ended 2 – 8 analog inputs, single ended 4 – 4 analog differential inputs 8 – 8 analog differential inputs 0 – None 1 – Power for external devices 0 – None 1 – Ethernet