Catalogs >
JPT Opto-electronics >
JPT M6+ MOPA Fiber Laser Application

JPT M6+ MOPA Fiber Laser Application
8Pages

Catalog excerpts

JPT M6+ MOPA Fiber Laser Application - 1

JPT-MOPA Fiber

JPT M6+ MOPA Fiber Laser Application - 3

_ Black Marking on Aluminum Oxide Marking Requirements Black marking with high efficiency Marking Matrix Fiber laser model: YDFLP-20-M6-S Hatching line width: 0.0009 The effect to be confirmed by customer. Hatch line distance: 0.0009mm

Open the catalog to page 3

JPT M6+ MOPA Fiber Laser Application - 4

Removing the Anodic Oxidation of Aluminum Marking Requirement: Remove the Anodic Oxidation of Aluminum with high speed; without introduce curvature on cosmetic surface of PAD. Marking Matrix F-Lens: F254MM Power: <20W Pulse width: 8ns Frequency: 100kHz Marking Speed: 5000mm/s After laser removing Surface curvature after laser treatment

Open the catalog to page 4

JPT M6+ MOPA Fiber Laser Application - 5

–Black marking on copper Marking Requirements To mark recognizable text or QR code with uniform color on the surface of copper. Marking Matrix F-lens: F100\160MM Power: 85% Pulse width: 10-20ns Pulse frequency: >200kHz Marking speed: 500~2000mm/s Application result The character is legible and complete. No blackening on the e

Open the catalog to page 5

JPT M6+ MOPA Fiber Laser Application - 6

–Removing paint from the surface Marking Requirements To mark letters and remove the black paint in middle of the glass. The letters should be sharp-edged and can be read by cell phones. Laser Glass Black Paint White Paint Marking Matrix F-lens: F160mm Power: 20% Pulse width: 200ns Pulse frequency: 17kHz Marking speed: 950mm/s Hatching line width: 0.034mm Result: Part of the black paint can be removed to form a rec

Open the catalog to page 6

JPT M6+ MOPA Fiber Laser Application - 7

–Barcode black marking on Aluminum Pop Can Marking Requirements To mark a certain grey scale, the barcode should be readable and the color grade be light. Barcode size: 5.5mm×5.5mm; total marking time should be within 6s. Marking Matrix Fiber laser model：M6 F-Lens：f=163 mm Power：8~12W Pulse width：10ns Pulse frequency：150kHz Marking speed：280mm/s Hatching linewidth：0.01mm Result The pulse energy of small pulse width is small, it can make the edge neatly, no residual left and th

Open the catalog to page 7

JPT M6+ MOPA Fiber Laser Application 8Pages

Catalog excerpts

All JPT Opto-electronics catalogs and technical brochures

JPT M6+ MOPA Fiber Laser Application
8Pages