BMP180 Blister Machine BMP 180 is compact and suitable for the blister packaging of capsules, tablets, pills, etc., for small batch production. Extremely straightforward format changeover. The main structure has a vertical partition to separate the drive section (rear) from the operating zones (front). GMP-compliant cantilever (balcony type) layout for effortless, pharmaceutically compliant cleaning. Adopts digital position indicator achieves straightforward adjustment. Sealing pressure adopts the gas-hydraulic pressure cylinder, so the pressure can be set freely according to the sealing area (commonly, a larger sealing area requires higher pressure. The blister length can be set freely through the Touch Screen User Interface, which reduces the time for a format changeover. The blister length can be set free through the Touch Screen User Interface, which reduces the time for a format changeover. The upper and lower plates adopt a contact heating method that significantly reduces the forming temperature. Thus, the shrinkage, deforming of packaging material, and power consumption are minimized. Using a fast lock method enables the replacement of lidding material easily within 10 seconds. It is suitable for plastic thermoforming and aluminum cold-forming blister packaging.