V1C Series Cage-Guided Control Valve
6Pages

Jordan Valve, a Division of Richards Industries 3170 Wasson Road • Cincinnati, Ohio 45209 Telephone 513-533-5600 • Fax 513-871-0105 Toll-FreeTelphone: 800-543-7311 (U. S. A. & Canada) E-Mail: info@richardsind.com • URL: www.jordanvalve.com V1C Series Cage-Guided Control Valve The V1C cage-guided balanced trim control valve offers high pressures and tight shutoff with the use of standard spring/diaphragm actuators. The balanced cage trim design enables this valve to handle differential pressures up to 1480 psi (102 bar) up through the 6” (DN150) size. The V1C contains a cage that is characterized in order to allow equal percentage and linear flow characteristics. Cavitation control trim, in-line maintainability, and fine proportioning control with high rangeability make the V1C both a precise and convenient valve to use for severe service control applications. The V1C Series is for use on a wide range of applications including throttling and on/off control of non-gritty liquids, gases and steam where the advantage of balanced trim, cage-guiding and wide rangeability are desired. FEATURES • Balanced Trim Design – Differential pressures up to 1480 psig/102 bar – Fine proportioning control and high rangeability • Cavitation Control Trim – Less damage to the valve and attached equipment in cavitating liquid service – Less noise in gas service • In-line Maintainability – Easy removal of yoke and actuator from valve body – Trim changes without removing body from the line Pneumatic Control Valves V1C Series GENERAL SPECIFICATIONS Sizes: 1-1/2”/DN40, 2”/DN50, 3”/DN80, 4”/DN100, 6”/DN150 End Connections: • Threaded — FNPT, BSPT, BSPP • ANSI Flanges — 150#, 300#, 600# • DIN Flanges — PN10/16, 25/40, 100 Body Rating: ANSI Class 150, 300, 600 Bonnet Style: • Plain • Extended • Bellows seal (1-1/2” - 4”) Trim Style: Standard ported — cage-guided, balanced plug with metal or soft seat; optional — cavitation control trim. (See Trim Selection Details) Flow Direction: • Ported Cage: flow into cage, down through seat ring • Cavitation Control Trim, Liquid Service: flow into cage and down through seat ring • Cavitation Control Trim, Gas/Steam Service: flow up through seat ring and out of cage Flow Characteristic: linear or equal percentage Shutoff: Standard — ANSI Class IV; optional — ANSI Class III or VI. See Shutoff Classes Chart. Actuators: ductile iron casings with Buna-N diaphragm; 1-1/2”/DN40 valves — 56in2; 2”/DN50 valves — 84in2; 3”/DN80, 4”/DN100 & 6”/DN150 valves — 140in2

V1C CAGE-GUIDED CONTROL VALVE MATERIALS SELELECTION Body Materials • Carbon Steel (ASTM A216, WCB) • Stainless Steel (ASTM A351, CF8M) • Please consult factory for alloy materials available Trim Material (See Trim Selection Chart) • Carbon Steel Valves: standard — 416SS plug with 416SS seat ring and 17-4 PH cage, 316/316L stem; optional — TFE insert ring for tight shutoff requirements • Stainless Steel Valves: standard — 316/316L SS plug, cage, seat ring and stem; optional — hard faced seats for aggressive services or TFE insert ring for tight shutoff Gaskets • For services from...

*316SST Cage and Guide has hard chrome plating applied. **Codes 4C and 4L have Alloy-6 hard facing. V1C CAGE-GUIDED CONTROL VALVE TRIM SELECTION GUIDELINES Body Code Bonnet Cage/Guide Plug/Seat Ring Plug Seal Packing CS 2A Plain 17-4 PH SST 416 SST Teflon Teflon 2G Plain 17-4 PH SST 416 SST 420 SST Graphite 2B Extension 17-4 PH SST 416 SST 420 SST Teflon (Graphite Lantern Ring) 2H Plain 17-4 PH SST 416 SST 420 SST Graphite 2C Extension 17-4 PH SST 416 SST 420 SST Teflon 2S Bellows 17-4 PH SST 416 SST Teflon Teflon (316L Bellows) SST 4A Plain 316 SST* 316SST Teflon Teflon 4H Plain 316 SST*...

Cavitation Control Cage: a series of diametrically opposing orifices divides the flow stream into multiple smaller streams with less energy. On liquid service, this trim is used as “flow into the cage” allowing the velocity streams to impinge upon each other to dissipate the energy and provide a buffer between the cavitating liquid and the metal valve parts. For gas/ steam services, the trim is used as “flow out of cage” with the velocity streams radiating out of the cage to redistribute the acoustical energy with resultant noise attenuation. Soft Seated Cage: a cast cage with separable...

ORDER SCHEMATIC V1C/1007/10K/AB V1C CAGE-GUIDED CONTROL VALVE 1 — 2 — 3 — 4 — 5 / 6 7 8 9 10 11 12 13 14 2 Size Inches DN 150 1-1/2" DN40 200 2" DN50 300 3" DN80 400 4" DN100 600 6" DN150 1 Model V1C Model 3 Body Material CS Carbon Steel S6 Stainless Steel 4 Bonnet Style P Plain E Extended S Bellows 7 Bonnet SD Standard ZZ Non-Standard 5 Trim Style S Standard C Anti-Cavitation 6 End Connections PT NPT SW Female Socket Weld BW Butt Weld, Sch. 40 I5 150# Integral Flange I3 300# Integral Flange I6 600# Integral Flange R6 600# Ring Type Joint D1 PN10 Integral Flange D6 PN16 Integral Flange D2...