Jordan Control Valve Series Mark V-100 Series Control Valve The Mark V-100 ball valve bodies have excellent Pressure and Flow Control for gasses, various liquids, and fibrous slurries. The Mark V-100 ball valve design utilizes a standard ball with a triangular shaped wedge formed in it. This design allows for both throttling control and on/off service used in conjunction with a variety of actuators. The Mark V-100 valve design closes against one of several available ball seals with a shearing action. The Mark V-100 is a flangeless design and allows the valve body to fit between two existing pipeline flanges. The typical actuator used is the pneumatic spring and diaphragm rotary actuator (1051). Mounting of this actuator can be on the right-hand or left-hand side viewed from the forward flow inlet. Mark V-100 Valve Body Shown Mark V-100 Series Control Valve •  Can be used for both throttling and on-off  applications •  Flangeless body design fits between raised face  flanges •  High flows •  Modified equal percentage flow characteristic   V-ball closes against the ball seal with a shearing action as the ball rotates. •  Used where there are low pressure drops and can   be used in slurry applications •  Tight shutoff Jordan Valve, a division of Richards Industries 3170 Wasson Road • Cincinnati, OH 45209 513.533.5600 • 800.543.7311 • 513.871.0105 (f) info@ri

Mark V-100 Series Control Valve Specifications Sizes: 2"-12" Maximum Inlet Pressures and Temperatures: •  Consistent with ASME Class 150, 300 and 600 lb   pressure/temperature ratings as per ASME B16.34   Refer to the following table and do not exceed the   pressure. Refer to “Installation” in the I & M. End Connections: •  ASME 150, 300, & 600 lbs, manufactured to ASME   B16.34-latest edition Body Materials: • LCC • WCB •  CF8M SST •  Additional materials may be available upon request Maximum Pressure Drops: Not to exceed pressure drop and temperature conditions specified at the time of ordering...

Mark V-100 Series Control Valve Dimensions (inches) Mark 1051 Actuator and Mark V100 Ball Valve Dimensions 1/4"-18 NPT Size 30 = 13.31 Size 40 = 19.88 Size 60 = 29.50 Size 70 = 33.53 Note: 1. Body of V- ball is shown rotated at 90° Size 30 = 4.51 Size 40 = 4.50 Size 60 = 4.75 Size 70 = 4.75 Size 30 = 2.56 Size 40 = 2.88 Size 60 = 3.00 Size 70 = 3.41 Size 30 = Ø11.68 Size 40 = Ø13.12 Size 60 = Ø18.63 Size 70 = Ø21.12 Size 30 = 5.38 Size 40 = 5.38 Size 60 = 5.88 Size 70 = 5.78 Approximate Weight Weight Body Size, Inches Size 30 = 3.62 Size 40 = 6.88 Size 60 = 7.31 Size 70 = 7.42

Mark V-100 Series Control Valve Flow Coefficients Flow Coefficients: Mark V-100 Line size: valve size=1:1 Valve Size Bore 2" Full 3" Full 4" Full 6" Full 8" Full 10" Full 12" Full Flow Coefficient - Cv Pressure Recovery - Km Cv Km Cv Km Cv Km Cv Km Cv Km Cv Km Cv Km Valve Rotation- 10o through 90o 10 Mark V-100 Line size: valve size=1.5:1 Valve Size Bore 2" Full 3" Full 4" Full 6" Full 8" Full 10" Full 12" Full Valve Rotation- 10o through 90o Flow Coefficient - Cv Pressure Recovery - Km Jordan Valve, a division of Richards Industries 3170 Wasson Road • Cincinnati, OH 45209 513.533.5600 • 800.543.7311...