Jordan Control Valve Series Mark ED & ET Series Globe Style Control Valves (1" - 6") The Mark E Series is a single port, globe-style body with composition or metal seats and a balanced push-down-to-close valve action plug. There are two styles of valve available, providing excellent pressure and flow control on steam, gasses and various liquid applications: The Mark ED Series is intended for general control applications over a wide variety of temperatures and pressure drops. This design has an upper piston ring seal and metal-to-metal seating. Features •  Top entry cage design allows easy, in-line maintenance Mark ED/ET Series Valve •  Balanced Plug allows the use of smaller actuators •  Characterized flow options including equal percentage, linear, and quick opening •  Available in a variety of body and trim materials   make the Mark E Series suitable for a variety of applications including liquids, gasses or steam •  Cage guiding allows the Mark E to handle high   pressure drops while providing greater plug stability •  Sour Service Capability: Optional NACE MRO175/   ISO 15156-2009 •  Tight shutoff Jordan Valve, a division of Richards Industries 3170 Wasson Road • Cincinnati, OH 45209 513.533.5600 • 800.543.7311 • 513.871.0105 (f) [email protected] • www.jordanvalve.com Mark ED & ET Series (1"-6") Control Valves The Mark ET Series is intended for applications requiring low leakage rates with composition seating (TFE) for tight shutoff requirements or metal-to-metal seating for higher temperature capabilities. The

Mark ED and ET Series 1"-6" Globe Style Control Valve Specifications Sizes: 1" - 6" Shutoff: •  Mark ET: ANSI Class IV & V •  Mark ED: ANSI Class II & III End Connections: •  ANSI Flanges- Class 150, 300 and 600 •  Raised Face, or Ring Type Joint flanges as per ASME   B16.34-latest edition Maximum Inlet Pressures and Temperatures: The Maximum Inlet Pressure and Temperature is consistent with ASME Class per ASME 16.34 Body Materials: •  LCC • WCB • WCC • WC9 • C5 • Monel •  CF8M SST •  Additional materials may be available upon request Maximum Pressure Drops: All Valves are Capable of Full Rated...

Mark ED and ET Series 1"-6" Globe Style Control Valve Mark ED/ET Series Dimensional Data Actuator Match Line Actuator Match Line D D Extension Bonnet Steel Bodies through 600lb Rating Valve Size Dimension B = Dim. A divided by 2; RF=Raised Face; RTJ=Ring Type Joint; Flange Spec. ASME/ANSI B16.5 - 1996 Valve Size

Mark ED and ET Series 1"-6" Globe Style Control Valve Steel Bodies through 600lb Rating Cont., Dimension D Valve Size Standard Bonnet Extension Bonnet Stem Size RF=Raised Face RTJ=Ring Type Joint; Flange Specification ASME/ANSIB16.5 - 1996 Approximate Weights- Without Actuator Valve Size, Inches Interpolation Table: Equal Percentage Cv Coefficients for Mark ED and ET 1-6 Inch Valves Standard Full Size Trim Percent Travel Jordan Valve, a division of Richards Industries 3170 Wasson Road • Cincinnati, OH 45209 513.533.5600 • 800.543.7311 • 513.871.0105 (f) [email protected] • www.jordanvalv