LOCATOR

LOCATOR

LOCATOR

Product catalog summary
Introduction
The LOCATOR® is a compressed air leak detector designed to address air leaks in compressed air systems, which can waste up to 30% of total air capacity. This waste leads to increased energy consumption and maintenance needs for compressors.

Product Features
  • Ultrasonic detection of air leaks within a frequency response of 20-100 kHz.
  • Capable of detecting leaks from a distance of approximately 10 meters with both audible and visual indicators.
  • Adjustable sensitivity to accurately locate leak areas.
  • Comes with a headset, rubber focusing cups, and a 9-volt battery with an automatic battery check.

Common Leak Points
  • Quick connection fittings with damaged or missing o-rings.
  • Filter, regulation, and lubricator (FRL) units.
  • Welds on pipe joints and flanges, which may leak due to vibrations, age, or improper welding.
  • Float or mechanical type condensate drains.
  • Pipe thread connections and air tools.

Function Principle
Ultrasound is produced when gas passes through a restricted orifice under pressure, transitioning from laminar to turbulent flow. The LOCATOR® detects the ultrasonic components of the sound, which are loudest at the leak site.

Conclusion
The LOCATOR® complements the AIR-SAVER® by detecting air loss, supporting the installation of zero air loss drains to reduce costs. It is a reliable tool for maintaining efficient compressed air systems.
See more

Catalog excerpts

LOCATOR-1

Compressed air leak detector Air leaks are a concern for anyone operating a compressed air system. The average plant (with no formal leak management program) will have air leaks that waste up to 30 percent of the total air capacity. Leaks will cause compressors to run at full load for longer periods of time. The compressors will not only use more energy but, may also need additional maintenance due to the increased loads. Leaks can give the false impression that additional compressors are required to meet the demand for compressed air. The LOCATOR® supports the reasons for installing zero air loss drains and the AIR-SAVER® as these two products offer cost reducing features. An AIR-SAVER® is installed to prevent the air losses caused through pipe line leakages etc. The LOCATOR® is therefore a natural progression from the installation of an AIR-SAVER®. The AIR-SAVER® offers air loss prevention - the LOCATOR® offers the air loss detection! Ultrasonic air leak detection of compressed air systems 20-100 kHz frequency response Long distance (approx. 10 meter) audible and visual indication of air leakages Adjustable detection sensitivity to really locate the leakage area. Supplied in case, complete with headset, rubber focussing cups and battery A 9 volt battery included and the LOCATOR includes an automatic battery check Common leak points: • Quick connection fittings have o-rings to seal the hose connections. A damaged or missing o-ring will cause the connection to leak. • FRL’s (filter, regulation & lubricator). • The welds found on pipe joints and pipe flanges can leak due to vibrations, age or improper welding. • Float or mechanical type condensate drains are also a source of air leaks. • Pipe thread connections, air tools and many more sources can be the cause of air leakages. THE COMPRESSED AIR CONDENSATE MANAGEMENT SPECIALIST

 Open the catalog to page 1
LOCATOR-2

Compressed air leak detector LOCATOR® function principle What produces ultrasound in a leak? When a gas passes through a restricted orifice under pressure, it is going from a pressurised laminar flow to low pressure turbulent flow. The turbulence generates a broad spectrum of sound. There are ultrasonic components in the sound and since the ultrasound will be the loudest by the leak site, the detection of these signals using the LOCATOR® is usually quite simple. Supplied in a case with all Information provided herewith is believed to be accurate and reliable. However, no responsibility is assumed...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.