TIMER CONTROLLED COMBO-D-LUX FLUIDRAIN-COMBO FLUIDRAIN-COMBO QS FLUIDRAIN-HP FLUIDRAIN EZ-1 TEC-44 TEC-11 TEC-55 COMPRESSED AIR CONDENSATE MANAGEMENT SPECIALIST CONDENSATE DRAINS

PRODUCT SELECTION DRAIN POINT SOLUTIONS JORC timer drain solutions for the above are: Standard solutions up to 16 bar High pressure & Stainless steel solutions up to 500 bar Highly contaminated condensate solutions up to 40 bar Compressors & after coolers Compressors & after coolers (Micro) filters Drip legs Drip legs Standard solutions up to 16 bar FLUIDRAIN-HP FLUIDRAIN-S FLUIDRAIN-COMBO QUICK-SET COMBO-D-LUX EZ-1 TEC-55

Useful information COMBO-D-LUX FLUIDRAIN-COMBO-QS FLUIDRAIN-COMBO FLUIDRAIN EZ-1 TEC-44 TEC-11 TEC-55 FLUIDRAIN-High Pressure Service kits Electronic timers BVS, coils & connectors Accessories Condensate Management Specialist CONDENSATE DRAINS

Information provided herewith is believed to be accurate and reliable. However, no responsibility is assumed for its use or for any infringement of patents or rights of others, which may result from its use. In addition, JORC reserves the right to revise information without notice and without incurring any obligation.

Condensation is the moisture that drops out of an air flow as it cools. The condensation in a compressed air system is a constant threat to cause expensive problems. The following are a few examples: • Moisture washes lubrication from air tools and production equipment causing downtime and maintenance. • An inconsistent supply of dry air causes production quality problems. • Excessive rust and scale often forms in the air distribution system. • Water can back up into the compressor and wreck the machinery. • Air dryers can become overloaded. • In-line filters can be destroyed. The problems get...

CE The CE Marking applies to products regulated by certain European health, safety and environmental protection legislation. The CE Marking is obligatory for products it applies to, the manufacturer affixes the marking in order to be allowed to sell his product in the European market. JORC products are CE certified. CULUS The UL Recognized Component Mark, which became effective April 1, 1998, may be used on components certified by UL to both Canadian and U.S. requirements. Although UL had not originally planned to introduce a combined Recognized Component Mark, the popularity of the Canada/U.S....

The ATEX Directive is a so-called "New Approach" Directive giving the Essential Health and Safety Requirements (EHSRs) and conformity assessment procedures which must be applied to equipment within its scope before being placed on the European market. These requirements provide for a high level of protection for citizens, and are given technical expression by what are called "Harmonised Standards". ROHS The RoHS Directive bans the use of certain restricted substances in end products, which prevents the substances from entering waste streams. According to the directive, new electrical equipment...

COMBO-D-LUX Digital timer controlled condensate drain PRODUCT FEATURES The COMBO-D-LUX is designed to remove condensate from compressors, compressed air dryers and receivers up to any size, type or manufacturer. The COMBO-D-LUX is an all-in-one digital timer drain with an integrated ball valve and strainer. The unit offers true digital time cycle programming luxury. COMMERCIAL BENEFITS • • • • • Does not air-lock during operation Compressed air systems up to any size Digital illuminated cycle display Suitable for all types of compressors TEST (micro-switch) feature TECHNICAL ADVANTAGES • • •...

PRODUCT SPECIFICATIONS Maximum compressor system capacity Valve connection options Minimum system pressure Maximum system pressure Minimum medium temperature Maximum medium temperature Valve orifice Type of operating valve Valve seals Installation enclosure Voltage range options Time cycle range (ON - OFF) Unlimited 1/2” BSP and NPT (dual inlet 1/2” & 1/4”) 0 bar 16 bar 2°C 50°C 4.0 mm Direct acting FPM (Viton) IP65/NEMA 4 10 to 240VAC/DC 50/60 Hz. 0.1 second – 99 hours COMBO-D-LUX TECHNICAL SPECIFICATIONS PRODUCT DIMENSIONS

FLUIDRAIN-COMBO-QUICK-SET Timer controlled condensate drain PRODUCT FEATURES The FLUIDRAIN-QUICK-SET is designed to remove condensate from compressors, compressed air dryers and receivers up to any size, type or manufacturer. The FLUIDRAIN-QUICK-SET saves installation time and protects against large particles found in condensate, thanks to the integrated ball valve and strainer. Quick Set timer adjustability. Simply adjust the unit according to the compressor capacity and the operating pressure – and go! COMMERCIAL BENEFITS • • • • • • Does not air-lock during operation Compressed air systems...

PRODUCT SPECIFICATIONS Maximum compressor system capacity Valve connection options Minimum system pressure Maximum system pressure Minimum medium temperature Maximum medium temperature Valve orifice Type of operating valve Valve seals Voltage range options Installation enclosure See timer indication 1/2” BSP and NPT (dual inlet 1/2” & 1/4”) 0 bar 16 bar 2°C 50°C 4.0 mm Direct acting FPM (Viton) 10 to 380VAC/DC 50/60 Hz. IP65/NEMA 4 FLUIDRAIN-COMBO-QUICK-SET TECHNICAL SPECIFICATIONS PRODUCT DIMENSIONS

FLUIDRAIN-COMBO Timer controlled condensate drain PRODUCT FEATURES The FLUIDRAIN-COMBO is designed to remove condensate from compressors, compressed air dryers and receivers up to any size, type or manufacturer. The FLUIDRAIN-COMBO saves installation time and protects against large particles found in condensate, thanks to the integrated ball valve and strainer. The unit can be shut off from the compressed air system, enabling easy and safe work to be carried out. COMMERCIAL BENEFITS • • • • • • Does not air-lock during operation Compressed air systems up to any size Dual thread inlet (1/2” &...