1. Catalogs
  2. Jorc Industrial
  3. AIR-SAVER G1 Compressed air energy saver

AIR-SAVER G1 Compressed air energy saver

AIR-SAVER G1 Compressed air energy saver

AIR-SAVER G1 Compressed air energy saver

Product catalog summary
Overview: The AIR-SAVER® is a device designed to conserve compressed air in industrial systems by preventing air loss through pipeline connections and leaks. It operates by shutting off the air tank from the rest of the system after working hours, thus saving the compressed air that would otherwise be lost.
Installation and Operation: The AIR-SAVER® is installed on the air outlet of the air tank. It can be programmed to automatically open before the start of a working shift and close after the shift ends. It features a slow valve opening to prevent water hammer in the pipeline system and can be controlled manually or remotely.
Features:
  • Available in 1” or 2” pipe size connections with a maximum pressure of 16 bar.
  • Time programmed or remote controlled operation.
  • Manual override in case of power failure.
  • Maintenance-free and fully automatic.
  • Integral Lithium battery for program protection.
  • Micro-processor controlled with a multi-cycle 7-day program.
  • Large LCD display for program cycle and current time.
  • Compact and easy to install with a user-friendly control panel.
Benefits:
  • Prevents unnecessary compressor start-ups when compressed air is not needed.
  • Saves at least one air receiver's worth of compressed air daily.
  • Allows shutting off parts of the pipeline system where air is not continuously needed.
Specifications:
  • Supply voltage: 230VAC or 115VAC 50/60 Hz.
  • Power consumption: 7W during cycle rotation.
  • Opening/Closing duration: 1” - 30 sec./90°, 2” - 105 sec./90°.
  • Max ambient temperature: 50°C, Max medium temperature: 100°C.
  • Pressure range: 0 to 16 bar.
  • Valve material: Brass/nickel plated.
  • Environmental protection: IP54.
  • Programmable options: 16 cycles/day, 7 days/week.
Common Leak Points: The document identifies common sources of air leaks such as damaged o-rings in quick connection fittings, FRLs, welds on pipe joints, float or mechanical type condensate drains, and pipe thread connections.
Contact Information: JORC Industrial BV, Tel: +31 45 524 24 27, Email: [email protected], Website: www.jorc.nl
See more

Catalog excerpts

AIR-SAVER G1 Compressed air energy saver-1

THE COMPRESSED AIR CONDENSATE MANAGEMENT SPECIALIST Atypical compressed air systemwill have air losses through pipeline connections, leaking float type drains etc.At the end of the final dailyworking shift the Air-Saver > ή willshut off the air tank from the rest of the system. The content of compressed air within the air tank will be saved rather than lost through pipe line leakages.The Air-Saver > is installed on the air outlet of the air tank.The Air-Saver > ή can be programmed to automatically OPENjust prior the working shift begins and CLOSE just after the working shift is over. > 1Ք or 2 pipe size connections Ԗ 16 bar maximum pressureSlow valve opening to avoid water hammer in pipe line system ՕTime programmed or remote controlled Manual valve opening and closing possible, in case of a power failure ՕFully automatic- maintenance free Easy to obtain air in case of overtime work ՕIntegral Lithium battery protecting the program Micro-Processor controlled (multi cycle 7 day program) ՕLarge LCD display showing program cycle and current time Compact design -Easy to install ՕUser friendly control panel - Simple to program Remote switching kit available > ՕNo unnecessarily start up of compressors during periods when compressed air isnot required.At least one air receiverՒs worth of compressed air savings per day. Possibility to shut of parts of the pipe line system where compressed air is notneeded continuously. >

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.