*mydirectindustry

JOPRO Automatic

Product catalog summary

Overview
JOPRO Automatic is a fully automated system designed to change AGV (Automated Guided Vehicle) batteries without the need for an operator. The process is efficient, taking only 3-5 minutes per battery change.

Safety Features
The battery changing process occurs in a secure, enclosed area protected by a light curtain. If a person attempts to enter this area, all system operations automatically halt, ensuring a safe working environment.

Communication and Control
The system communicates with the AGV through a signal interface. It includes a complete operator compartment and controls for manual override and operation if necessary.

Reliability
All functions are managed by a PLC (Programmable Logic Controller) and utilize technology from the established JOPRO Transfer system. Positioning is achieved using laser and camera technology.

Options
An optional feature includes a 1200 mm height adjustment to access battery compartments at two levels, which can save approximately 60% of floor space compared to a single-level system.

Specifications

Maximum battery weight: 2000 kg
Maximum battery dimensions (length x width): 1230x900 mm
Battery roll-out height: Minimum 120 mm, Maximum 720 mm

The truck's battery compartment must be equipped with a roller bed.

Catalog excerpts

Fully automated battery changing JOPRO Automatic automatically changes AGV batteries. No operator is needed. A battery change takes only 3-5 minutes. Provides a safe working environment The battery change takes place in an enclosed area behind a light curtain. If any person tries to enter the changing area all system motion automatically stops. JOPRO Automatic communicates with the AGV via a signal interface. Complete operator compartment and controls allow for manual over-ride and operation if required. Reliable operation All functions are controlled by PLC and use the same technology as our proven JOPRO Transfer. Laser and camera technology is used for positioning. Options +Level 1200 mm height adjustment to reach battery compartments in two levels. Two level storage saves about 60% floor space compared to a one level system. Specifications Battery weight: max. 2000 kg Battery measurements (lxw): max. 1230x900 mm Battery roll-out height: min. 120 mm max. 720 mm The truck's battery compartment has to be equipped with a roller bed. Lunnavagen 6 Phone: +46-303-749740 E-mail: [email protected] SE-44950 Alafors Fax: +46-303-748206 Website: www.jopro.com

Open the catalog to page 1

JOPRO Automatic

JOPRO Automatic

Catalog excerpts

All Jopro - Battery Handling Solutions catalogs and technical brochures