jp link straight and curved conveyors without transfers Small inner radius The flexible JP Link conveying systems of Jonge Poerink Conveyors will find their way into many production environments. Long horizontal carrying lengths, inclining or declining tracks, several curves in succession, oval, spirals: JP Link takes them smoothly and reliable with few Technical specifications or no transfers, minimizing the risk of damaged products. belt MP transfer The JP Link system easily replaces several conveyors and expensive curves. In some cases the total belt length can be considerably reduced because only an upper part is needed. The belt surface of the JP link is not completely closed. Through the open area of the belt, fluids can fall to the ground, which enables the JP Link system to be used in wet environments. On a straight section the open area is 36% of the surface. The belt material is FDA approved. Thanks to the small inner radius of max. 1.3 times the belt width, the JP Link system can be installed in a confined space and used in almost every floor plan. JP Link ensures that products will leave your production line in a uniform manner. Even after several curves, your products will be ready for the following (automated) process. industriestraat 6b | the netherlands | p.o. box 4 | 7620 aa borne | phone t +31 (0)74 255 7430

L arge carrying lengths without transfers Food processing: washing, drying, cooling, dewatering of unpackaged products and general conveying of packed products. Paper and print industry: and total belt length call for rapid conveying of products from one location to another and S mall inner radius; max. 1,3 x belt width for all items to reach their destination in perfect condition. • Technical specifications belt MP transfer belt width useful • Entire • L arge belt widths possible: up to 1.400 mm Technical specifications Belt material Panels: Polyacetal (white, blue, black) Rods: Stainless Steel...