Sealing presses
8Pages

{{requestButtons}}

Catalog excerpts

Sealing presses - 1

Our sealing presses allow two-dimensional sealing of contours. Pro-duction of special sealing tools makes it possible to seal many dif- ferent shapes.This product group also covers a wide range of fields of application. On the one hand, the most diverse shapes can be sealed with spe- cial sealing tools, on the other hand, sealing presses are available that can seal large film widths up to 3500 mm or sealing presses with which round bottom bags for example can be produced.The sealing presses are highly efficient and have a high contact pressure. The sealing parameters are infinitely adjustable. The JOKE > Sealing presses sealing presses are the ideal partner for your tricky sea-ling jobs. >

Open the catalog to page 1
Sealing presses - 3

Sealing presses The SP 4 sealing press allows sealing of almost any conceivable 2-dimensional sha- pe. This is made possible by special sealing tools, which are individually manufactured for your application.The pneumatic cylinder of the sealing press ensures the required contact pressure and therefore thicker materials can also be sealed.A pulse generator is required for the sealing press. The sealing and cooling times are adjusted here. According to requirements, the SP 4 sealing press is supplied with a temperature control. > Sealing of plastic trays Cooling cushions with gel filling...

Open the catalog to page 3
Sealing presses - 4

Technical and design modifications reserved > Order no.2 015 3212 016 376Cylinder stroke100 mm100 mm Range of action225 mm225 mm Working piston diameter80 mm100 mm Force of pressure3.000 N4.700 N Air comsumption at 6 bar5.3 l/stroke6.6 l/stroke Dimensions (W x H x D)350 x 750 x 550 mm350 x 750 x 550 mm Connected voltage230 V, 50/60 Hz230 V, 50/60 HzFuse16 A, slow-blow16 A, slow-blowDegree of protectionIP 20IP 20 Weight without impulse unit80 kg80 kg Sealing toolsindividually tailored to requirementsindividually tailored to requirements Impulse unitindividually tailored to...

Open the catalog to page 4
Sealing presses - 5

Sealing presses The HTP series sealing presses are above all suitable for materials that require a very high contact and sealing pressure. Sealing seam lengths of up to 3500 mm and sealing seam widths of up to 10 mm are possible in this case. > Sealing of film webs in thicker PE mate- rial (covering hoods) Production of inliners in PA/PE or ALU/ PE composite materials Sealing and separating sealing of bubb- le pack films Film-sealing of bulky goods Multiple-layer materialsՕ Օ >

Open the catalog to page 5
Sealing presses - 6

Technical and design modifications reserved > Cylinder stroke100 mmWorking piston diameter100 mm Air consumption at 6 bar3,5 l/stroke Sealing length1.700 mmSealing widthmax. 10 mmNoise level< 70 dB (A)Impulse timecontinuously adjustableCooling timecontinuously adjustableTemperaturecontinuously adjustable Actuationtwo-hand control console Dimensions (W x H x D)2.800 x 1.670 x 750 mm Connected voltage400 V, L1/L2/PE, 50/60 Hz Fuse25 A, slow-blow Degree of protectionIP 54 Weight350 kg > Sealing presses high sealing pressure wide sealing bar opening high item throughput safety by two-hand...

Open the catalog to page 6
Sealing presses - 7

Sealing presses This machine is used for manual manuf- acture of round-bottomed bags for special uses, e.g. as inliner bags inside drums. Both PE and ALUMINIUM/PE films can be processed.Tubular film, cut to size, is used, stretched by hand over a round plate intended for the purpose and to which a round cut-out of film is applied. These components are brought together in the sealing position and the sealing process is triggered by a two-hand controller.After running the preset sealing parameters, the round plate can be moved back to the initial position and the finished bag can be removed....

Open the catalog to page 7
Sealing presses - 8

Technical and design modifications reserved > Cylinder stroke100 mmWorking piston diameterdepends on tool-diameter Force of pressuredepends on tool-diameter Air consumption at 6 barapprox. 4 l/cycleSealing punch actuationpneumaticSealing process startingtwo-hand controlSealing widthstandard 6 mm (modifiable on request)Round plate diameter250 - 680 mmOutputmax. 2 sacks/min Noise level< 70 dB (A) Impulse timecontinuously adjustable Cooling timecontinuously adjustable Dimensions (W x H x D)1.500 x 1.400 x 1.050 mm Connected voltage400 V, 50/60 Hz Fuse16 A, slow-blow Degree of protectionIP 20...

Open the catalog to page 8

All Joke Technology catalogs and technical brochures

  1. ENESKAmobile

    4 Pages

  2. Repair welding

    88 Pages

  3. ENESKAsonic

    4 Pages

  4. ENESKAmicro

    16 Pages

  5. Chipping tools

    40 Pages

  6. Repair welding

    88 Pages

  7. joke catalogue

    451 Pages

  8. FS katalog

    72 Pages