Catalog excerpts
Chipping tools Overview Milling cutters for processing aluminium, shank Ø 3 mm Carbide milling cutters Sets Carbide milling cutters, shank Ø 3 and 6 mm Gravers, solid carbide metal Steel riffle files Carbide milling cutters, shank Ø 2,35 mm Miniature carbide milling cutters/finishers Ø 1,6 mm Engraver’s milling cutters HSS, shank Ø 3 mm Filing tools Hand deburrers
Open the catalog to page 1378 Milling tools Engraver's milling cutters HSS Carbide milling cutters Gravers, solid carbide metal 402 Filing tools Steel needle files Steel riffle files 410 Deburring tools Hand deburrers Reverse deburrers Deburring knife
Open the catalog to page 2Engraver’s milling cutters in HSS Milling cutters, shank Ø 1,6 mm Milling cutters, shank Ø 2,35 mm Milling cutters, shank Ø 3,0 mm 400 Gravers 401 Solid carbide microdrills If you have always held the opinion that a milling bur is just a piece of carbide available in various shank and head sizes, you should pay particular attention to the following pages. It is worth checking the milling bur down to its teeth. Ultimately, the type of cut decides what materials it can be best used on (see illustration below). Cutting types of the joke miling cutters: Normal cut Even cutting performance with...
Open the catalog to page 3Protection for the eyes Protective goggles • Clear, optically correct, single-piece PC pane • Scratchproof coating • casual design, extremely light (21.5 g) • Protection against general hazards and flying particles (up to 45 m/sec.) • Comfort pads on the temple ends • Soft nose pad Price from Order No. 1 piece Blowing pen A must for every workplace! Possibly the smallest blowing pen in the world. It weighs a mere 20 g and regulates the compressed air perfectly. The small aperture of 3 mm ensures that the air really only goes where it should. A must for every workplace! Price from Order No....
Open the catalog to page 4380 Engraver's milling cutters in HSS shank 0 3 mm '/VW'"ioke-technPof°list2020* or contact °'°tiy-Com Sales@joke.de Engraver's milling cutters in HSS Ideal for fine working on steel, cast steel, alloyed and unalloyed, and on non-ferrous metals with high resistance to cutting. Cutting speed: Vmax. 60 - 180 m/min Head dimensions Engraver's milling cutters in HSS, shank 0 3 mm cylinder 0 6 x 10 mm 0 7 x 10 mm sphere Shank 0 x total length Price from Order No. 1 piece 10 pieces wheel, flat
Open the catalog to page 5Engraver's milling cutters in HSS shank 0 3 mm Head dimensions pointed cone 70° ^ 0 4 x 2.8 mm Shank 0 x total length Price from Order No. 1 piece 10 pieces matching set Price from Order No. 1 set Speed recommendations for engraver's milling cutters in HSS
Open the catalog to page 6Price from Shank 0 x total length Cut Head dimensions Carbide milling cutters/finishers, shank 0 1.6 mm cylinder 0 0.8 x 3.6 mm 0 0.9 x 4.0 mm 0 1.2 x 4.5 mm 0 1.4 x 4.5 mm Packing quantity Order No. 1 piece
Open the catalog to page 7Carbide milling cutters/finishers shank 0 1,6 mm Head dimensions Shank 0 x total length Cut Price from Packing quantity Order No. 1 piece cone with safety point 0 1.4 x 6.0 mm 0 1.4 x 9.0 mm cone, round torpedo, conical cylinder, round matching set Price from Order No. 1 set Set of carbide milling cutters/finishers
Open the catalog to page 8384 Carbide milling cutters with titanium nitride coating Head dimensions Shank 0 x total length Cut Carbide milling cutters with titanium nitridecoating, shank 0 1.6 mm cylinder 0 1.0 x 4.2 mm 0 1.6 x 19 mm double cut cone, round 0 1.6 x 19 mm double cut The perfect complement High speed handpiece P 320 • max. speed 320,000 rpm • ideal for all filigree tasks (deburring on steel, stainless steel, glass and plastics) • compact, ergonomic shape • rapid tool change Order No. Price Price from Packing quantity Order No. 1 piece
Open the catalog to page 9Milling burs made of ceramic material Shank-0 2,35 mm The cutters made of high-performance ceramics are available in a cylindrical, round conical and tree shape. Each shape is available with coarse, medium and fine teeth. The cutters are characterised by a long service life, very good cutting properties, little heating, no smearing or clogging and very quiet running. Optimally suited for processing plastic, rubber, silicone, foam, plaster and acrylic, etc. Recommended speed range: Head dimensions Milling burs made of ceramic, shank 0 2.35 mm Shank 0 x total length Cut Price from Order No. 1...
Open the catalog to page 10386 Carbide milling cutters shank 0 2,35 mm Head dimensions Carbide milling cutters,shank 0 2.35 mm cylinder Shank 0 x total length Cut 0 2.35 x 44.5 mm normal 0 2.35 x 44.5 mm normal 0 2.35 x 44.5 mm normal 0 2.35 x 44.5 mm normal 0 2.35 x 44.5 mm normal 0 2.35 x 44.5 mm normal 0 2.35 x 44.5 mm normal 0 2.35 x 44.5 mm normal 0 2.35 x 44.5 mm normal 0 2.35 x 44.5 mm normal 0 2.35 x 44.5 mm normal 0 2.35 x 44.5 mm normal Price from 1 piece 10 pieces 100 pieces diameter diameter/ rotational 10 mm 12 mm Recommended cutting speeds: hardened steels, non-hardened steels, cast steel tainless...
Open the catalog to page 11Milling cutters INOX shank 0 3 mm The INOX series milling burs have a specially developed geometry for the growing market demand for stainless steel processing. These new cutters offer genuine advantages owing to their effective milling performance that allows high stock removal on all austenitic, rust- and acid-resistant steels. Up to 100% more cutting performance compared to conventional criss-cross teeth. In addition, the new cutter geometry allows the operator to work more efficiently by reducing heat generation (no annealing colours) at the interface between the cutting edge and the...
Open the catalog to page 124. Chipping tools | 4.1. Milling tools Milling cutters for processing aluminium shank Ø 3 mm Milling cutters for processing aluminium Milling cutters with a coarse cut and a Ø 3 mm shank. For processing non-ferrous metals, aluminium, copper, brass and plastics. Optimally suited for milling work (deburring, welding seam processing, contours, etc.) in mould, machine and model building. Cutting speed: 400 - 1.000 m/min Head dimensions Shank Ø x total length Milling cutters for processing aluminium, shank Ø 3 mm cylinder Ø 3 x 14 mm solid carb. solid carb. solid carb. solid carb. solid carb....
Open the catalog to page 13All Joke Technology catalogs and technical brochures
-
ENESKAmarker 300
4 Pages
-
ENESKAmobile
4 Pages
-
ENESKArobotics
4 Pages
-
ENESKAsonic
4 Pages
-
ENESKApostpro
4 Pages
-
ENESKAmicro
16 Pages
-
Blasting systems
14 Pages
-
Polishing and lapping technology
40 Pages
-
Workplace systems
74 Pages
-
Cleaning systems
18 Pages
-
Diamond and boron nitride tools
62 Pages
-
Grinding and polishing tools
216 Pages
-
Laser welding
8 Pages
-
joke catalogue
451 Pages
-
FS katalog
72 Pages
-
Welding and coating systems
46 Pages
-
Sealing presses
8 Pages
-
Film sealing devices
38 Pages
Archived catalogs
-
2019 Repair welding
88 Pages
-
Driving motors and handpieces
94 Pages