Samotronic101 SAMOTRONIC101 Driver for unipolar motors Dimensions (mm) 55 x 40 Supply voltage (VDC) 10-24 Motor current constant voltage drive Step mode full/half step Clock source internal or external Control inputs to inhibit internal clock inhibit motor current ◼change direction of rotations ◼ ◼ Configuration via DIP-switch, potentiometer Preferred Range Ordering Reference 4 636 6608 0 If motors are also to be ordered please state: “with MTA-100 receptacles for use with SAMOTRONIC101“. 4 636 6608 3 with screw terminal for motor connection, max 0.5 mm2 Technical Data Driver Board Supply voltage Phase current Control signal level LS-TTL (0-5V) for all control inputs Internal clock External clock Operating temperature Storage temperature For latest technical and safety compliance information regarding these products, please download the relevant data sheet from our web site: www.saia-burgess.com/drivers Saia motors

Samotronic102 SAMOTRONIC102 Driver for bipolar motors Dimensions (mm) 84 x 54 Supply voltage (VDC) Motor current s tandard version 10 DC–24 enhanced version 10 DC–42 constant current drive (chopper controlled) adjustable via potentiometer Step mode full/half step Clock source internal or external i nhibit internal clock i nhibit motor current ◼ hange direction of rotations c Configuration via DIP-switch, potentiometer Test pins motor current step frequency Preferred Range Ordering Reference If motors are also to be ordered please state: “with MTA-100 receptacles for use with SAMOTRONIC102”. Supply...

Driver for unipolar and bipolar motors Dimensions (mm) metal case 164 x 130 x 45 Motor voltage (VAC) 8-48 Bipolar motors (< 8 on request) Motor current constant voltage drive and constant current drive (chopper controlled) step mode full/half/micro step Clock source internal, programmable Control inputs to ■ 3 digital inputs Order Reference Power supply (on request) Technical Data Supply voltage Phase current Step modes Operating temperature Storage temperature 11 (full, half, wave ... microstep) Test the Stepconfreeware without hardware in a special demo mode For further information please contact...