Elevated Flares
7Pages

Catalog excerpts

1. Installation of FSX Flare Tip 2. Self Supported Steelworks Flare 3. Ground Flare on FPSO 4. Knock-Out Drum 5. Demountable Flare with Derrick Structure 6. Biogas Ground Flare Burner 7. Flare Tip on Nkossa Floating Production Barge 8. BP Andrew - Production Platform 9. Guy Supported Flares with FUS Flare Tips 10. Biogas Ground Flare 11. Water Seal Integral with Flare Stack Base > Hamworthy Combustion Engineering Italy is the world centre of flare technology for Hamworthy Combustion Engineering. With over thirty years experience in flare design, a mult-inational project management team, and...

Open the catalog to page 2

Each flare system is individually designed to meet customer requirements Offices in fifteen countries over five continents Representation in over eighty countries worldwide Flare design based on over thirty years field experience Comprehensive spares and service cover Advanced flare technology combining the extensive expertise of Airoil-Flaregas and Peabody Engineering Commissioning Site supervision This network ensures that wherever you are in the world, there will be fully qualified personnel to provide assistance and advice on the most cost effective flare product for your application....

Open the catalog to page 3

Often used in combination with an elevated flare, the use of a ground flare offers many advantages, particularly where strict environmental issues have to be considered. The Hamworthy (Airoil-Flaregas) range of ground flare systems include the following: The enclosed chamber ground flare enables flaring without the flame being visible from the chamber itself outside. If plot area is a constraint, the radiation resulting from an open flame can be eliminated, thus reducing the necessary plot size. Dependent on the type of gas to be burned and the pressure of the gas, the enclosed chamber...

Open the catalog to page 4

Flare Type Description FN Pipe flare FNS Low calorific value gases FC Smokeless flare tip using centre steam/gas injection only FUS Standard and low noise steam injected smokeless flare FSX Low noise steam injected, high smokeless capacity flare HTF Low noise steam injected, high smokeless capacity flare FAB Air blown smokeless flare FSM Sonic flare >

Open the catalog to page 5

The most economical solution for flaring applications is the elevated flare. The Hamworthy (Airoil-Flaregas) range has been designed to provide optimum performance and high reliability, whilst ensuring low maintenance. Hamworthy (Airoil-Flaregas) supplies the complete flare system. All flares are manufactured to the highest standards, and each contract is treated on an individual basis. All flare tips and supporting structures for elevated flares are designed be Hamworthy (Airoil-Flaregas). The choice of system depends on many elements. Typical considerations are as follows. > Visible Rich...

Open the catalog to page 6

The Hamworthy (Airoil-Flaregas) proprietary purge reduction devices include: Flame Front Ignition Gas Seals (Purge Reduction Devices) Several types of flare pilot Ignition systems can be provided. The most usual is by the "flame front system" in which an ignition tube to the pilot is filled with a combustible mixture. This system utilises a manual or automatic control panel located at ground level which provides a combustible mixture of gas and air in a tube from the panel to the pilot at the flare tip. The system ignites the combustible mixture which then travels up the tube and ignites...

Open the catalog to page 7