Catalogs >
John Zink Hamworthy Combustion >
Blast Furnace Gas Burner

Blast Furnace Gas Burner
3Pages

Catalog excerpts

The Peabody Blast Furnace Gas (B.F.G.) burner from Hamworthy Combustion Engineering has been designed for use in boilers, furnaces and fired heaters that utilise low calorific value gas as the main fuel. The burner is a volute plenum chamber, which the gas enters tangentially and flows In a single uninterrupted stream until it leaves through the unobstructed annular exit port into a refractory throat. The radial or axial dimensions of the scroll are decreased so that the gas passage area is reduced as gas is discharged. The gas leaves the port as a spinning hollow cylinder to mix with the...

Open the catalog to page 2

A x A1 Combustion Air Inlet E Gas Scroll Dimension B x B1 Blast Furnace Gas Inlet F Gas Scroll Dimension C Burner Throat Diameter G Throat Depth D Refractory Retaining Ring Register Single vane register comprising curved vanes of mild steel linked and operated by one lever manually or if desired by an actuator. Spacer Mild steel bolted to the unit with expansion gap in over-lapping vane backplate.Throat High alumina quality throat tiles or formed with a suitable high duty castable refractory. Front Plate Mild steel, insulated when required, with fixings for oil or gas guns, ignitor, flame...

Open the catalog to page 3