The Push-fit People
8Pages

John Guest@ The Push-fit People POLAR CLEANTUBE-IN-TUBE TECHNOLOGY Cool, fresh beer every time, with Polarclean.

Polarclean® is a simple yet innovative push-fit drinks dispense range, conceptualized and developed by John Guest. The range enhances the conditioning of beer & beverages in the supply tube using ‘tube-in-tube’ technology. The improved heat transfer efficiency of tube-in-tube compared to traditional ‘contact’ cooling, allows pubs, bars and restaurants to serve extra cold beer & beverage at every pour, without a cold-room or secondary cooling device. Tube-in-tube can be deployed from keg to tap and helps overcome product stagnation by keeping every part of the draught system consistently...

Polarclean technology allows one push-fit connection inside another, enabling a tube-in-tube arrangement. The internal primary product tube is fully enveloped by a secondary external tube carrying a constantly recirculating refrigerated coolant (typically water or water/glycol blend), over the entire length of the system. The refrigerated coolant and more efficient heat transfer of tube-intube maintains the critically low temperatures necessary to keep beer and beverage fresh. Polarclean also offers much more flexibility for draught installations because the keg, cooler and font can all be...

Coolant Flow Product Flow Polarclean Tee Connector or Parallel Connector Polarclean Equal Straight (extention or repair) Install the Polarclean Elbow for a perfect right angle Polarclean Keg Connector use with 1/2” Stem Elbow PI221616S info@johnguest.com johnguest.com Polarclean Elbow, Parallel or Tee Connectors

TO MAKE A TUBE-IN-TUBE CONNECTION Outer Collet Outer O-ring Beer Tube Tube Stop Inner O-ring Inner Collet Coolant Tube For transparent connectors: 1. Push beer tube up to tube stop. Visually confirm correct tube positioning and pull to check connection is secure. 2. Push the coolant tube up to the tube stop. Visually confirm correct tube positioning and pull to check connection is secure. 3. Connect beer supply and check for leakages. 4. Connect coolant supply and check for leakages. TO DISCONNECT A TUBE-IN-TUBE CONNECTION For transparent connectors: 1. Ensure both beer and coolant ines are...

POLARCLEAN EQUAL ELBOW CONNECTOR 3/8” WITH 1/2” COOLANT INLET (USE STEM ELBOW AT COOLANT INLET - PI221616S) POLARCLEAN REDUCING ELBOW CONNECTOR NC909 3/8” THRO’ / 3/8” COOLANT BRANCH POLARCLEAN EQUAL STRAIGHT CONNECTOR POLARCLEAN PARALLEL CONNECTOR 3/8” THRO’ / ½” COOLANT BRANCH IN-LINE POLARCLEAN INTERNAL COLLET RELEASE TOOL POLARCLEAN BARBED COOLER SPIGOT NOTE: ALL ‘OUTER’ TUBE-IN-TUBE COOL

John Guest Limited Horton Road, West Drayton, Middlesex, UB7 8JL, England Tel: (00 44) (0) 1895 449233. E: info@johnguest.com 180 Passaic Avenue, Fairfield, New Jersey 07004, U.S.A. Tel: (001) 973 808 5600 E: info@jgusa.com Via Vincenzo Lancia 13,10038 Casabianca Verolengo (Torino), Italy Tel: (00 39) (011) 957 5880 E: info-italia@johnguest.com 143-147 Avenue Charles Floquet, Parc Gustave Eiffel, F-93593 Le Blanc Mesnil, Cedex, France Tel: (00 33) 1 48 65 52 29 E: info@johnguest.fr C/de La Electronica No.7, Poligono Industrial La Ferreria, Montcada I Reixac, 08110 Barcelona, Spain Tel: (00...