John Guest® Blown Fibre and Minicable Applications
12Pages

Blown Fibre Systems

blown fibre 2012_blown fibre cat 02/05/2012 09:06 Page 3 Quality Manufacture The John Guest Group has a long established reputation as a world leading manufacturer of push-fit fittings, tube and other fluid control products. A reputation built on producing consistently high quality products with an ongoing commitment to value engineering and product development. A commitment to quality is at the heart of the John Guest philosophy The strictest control is maintained by virtue of the fact that design and manufacture is carried out in modern purpose built manufacturing centres in west London...

blown fibre 2012_blown fibre cat 02/05/2012 09:06 Page 4 Contents Gas Block Connectors End Stops Reducers and Enlargers Straight Connectors 4 Bulkhead Connectors Water Block Connectors Closed Down Assemblies 5 Speedfit Secure Connectors 6 12 Way Manifold 7 12 Way Ribbon Connectors Collet Covers Tools 8 Plastic Cartridges Plugs Collet Clips 9 www.johnguest.com 2

blown fibre 2012_blown fibre cat 02/05/2012 09:06 Page 5 A Range of Push-fit Connectors specially designed and produced for blown fibre and mini cable applications Fibres/Cables can be blown through most connectors in either direction (check with product data sheets). To make a connection, push the tube into the fitting. The unique John Guest locking system then seals and connects the microduct tube providing a seamless path for unhindered fibre bundle/mini cable passage. For additional security ie. direct buried applications, the ‘Speedfit Secure’ range incorporates an integral collet...

blown fibre 2012_blown fibre cat 02/05/2012 09:06 Page 7 BULKHEAD CONNECTORS WATER BLOCK CONNECTORS PART NO. The Water Block range of connectors has been designed for fast installation times and reliable performance. TUBE THRO’ OD mm BORE mm PM1204E PM1205E PM1206E PM1208E PM1210E PM1212E 4 5 6 8 10 12 2.5 3.4 4.8 5.8 7.6 8.6 PART NO. TUBE OD/ID mm ØTUBE NO. NC2113 THRO’ OD/ID mm 5/3.4 5/3.4 MOUNTING 3.4 ØTUBE NC2311 NC2179 NC2571 BORE mm HOLE Ømm 12.5 PART NO. CLOSE DOWN ASSEMBLIES THRO’ BORE mm 3/2.2 5/3.0 4/2.2 3/2.2 3/1.4 3/2.1 0.9 0.9 0.9 ØTUBE THRO’ OD/ID mm BORE mm *NC2589 3/2.2...

blown fibre 2012_blown fibre cat 02/05/2012 09:06 Page 8 ‘SPEEDFIT SECURE’ STRAIGHT CONNECTOR ‘SPEEDFIT SECURE’ GAS BLOCK CONNECTOR A robust connector range with integral collet locking feature. The ‘Speedfit Secure’ range of connectors have been designed to ensure fast and secure installation and reliable performance in testing conditions. The Gas block connectors utilise John Guest Push-fit technology allowing gas blocking connections to be made simply without the need for tools. PART ØTUBE OD/ID mm NO. THRO’ BORE mm NC2655 7/3.5 7/3.5 NC2534 7/4 7/4 NC2519 14/9.9 14/9.9 3.5 4 9.9 PART...

blown fibre 2012_blown fibre cat 02/05/2012 09:07 Page 9 12 WAY MANIFOLDS PART ØTUBE NC2573 THRO’ OD/ID mm NO. BORE mm 4/2.7 6/2.7 2.5 The John Guest 12 Way Manifolds provide a smooth fibre path between microducts. • 12 Way Manifold (NC2573) pictured with Coloured Collet Covers (NC2579-’XX’) and Special Plugs (C-1170702). Note: NC2573 is supplied with Plugs pre assembled but not Collet Covers. See also plug Removal Tool NC2627 page 8. Typical use of NC2573 in a pole top aerial installation - in readiness for subscriber connection (‘Homes Passed’) COLOURED COLLET COVERS For use with 12 Way...

blown fibre 2012_blown fibre cat 02/05/2012 09:07 Page 10 12 WAY RIBBON CONNECTOR - MALE PART NO. NC2577-01 PLUG REMOVAL TOOL TUBE THRO’ OD mm BORE mm 3 1.2 PART NO. TUBE OD mm NC2627 Developed to assist the removal of 6mm plugs C-1170702 from the 12 Way Manifold Part No NC2573. Locate tool and ‘pinch’ fingers over plug. Ensure pinch fingers have engaged under head of plug. 12 WAY RIBBON CONNECTOR - FEMALE PART NO. NC2577-02 TUBE THRO’ OD mm BORE mm 3 1.2 • Male and Female Ribbon Connectors attach together. Using thumb - push down hard to release collet. At same time use fingers to extract...

blown fibre 2012_blown fibre cat 02/05/2012 09:07 Page 11 PLUGS COLLET CLIPS PART NO. Special, use with NC2627 removal tool PART NO. TUBE OD mm PM0804R PM0805R PM0806R PM0808R PM0810R PM0812R PM0818R C-1170702 TUBE OD mm PM1805R PMC1808R PM1810R PM1812R 4 5 6 8 10 12 18 6 5 8 10 12 Secures the collet in its position to prevent an accidental disconnection of the tube. PLASTIC CARTRIDGES A quick, simple and efficient way of incorporating a push-fit connection into original equipment. The Plastic Cartridge is made up of three components, a body, an ‘O’ ring and a collet to grip the tube. When...

blown fibre 2012_blown fibre cat 02/05/2012 09:07 Page 12 GENERAL CONDITIONS OF SALE 1. GENERAL (a) These conditions and any special conditions agreed in writing between us and the purchaser shall apply to all by us and all orders and contracts for the manufacture or sale of goods accepted or carried out by us to the exclusion of any conditions in the purchaser's order terms or otherwise imposed by the purchaser. (b) All orders are subject to our written acceptance and in particular no binding contracts shall be created by the acceptance by the purchaser of a quotation or offer made by us...

blown fibre 2012_blown fibre cat 02/05/2012 09:07 Page 1 John Guest International Limited John Guest USA Inc. 180 Passaic Avenue, PO Box 11085, Fairfield, New Jersey, 07004-7085, USA T: (001) 973 808 5600 E: info@jgusa.com John Guest Limited Horton Road, West Drayton, Middlesex UB7 8JL, UK. Tel: (00 44) (0) 1895 449233 E: info@johnguest.com John Guest France S.A. 143-147 Avenue Charles Floquet, Parc Gustave Eiffel, F-93593 Le Blanc-Mesnil, Cedex, France T: (00 33) (0)1 48 65 52 29 E: info@johnguest.fr John Guest GmbH Ludwig-Erhard-Allee 30, D-33719 Bielefeld, Germany T: (00 49) (521) 972...