video corpo

Type 5611/5611Q
8Pages

{{requestButtons}}

Catalog excerpts

Type 5611/5611Q - 1

Elastomer Bellows Seals A B C D E – Face/Primary Ring – Seat/Mating Ring – Elastomer Bellows – Spring – Gland Product Description The Universal Cartridge 5600 Series is a modular cartridge seal family that includes interchangeable elastomer bellows, Sealol® metal bellows, and elastomer o-ring pusher seal designs. The Type 5611 and 5611Q single seal arrangements incorporate the John Crane Type 1 Seal head assembly with the Universal Cartridge adaptive hardware. ■ Automatic adjustment compensates for abnormal shaft end play and runout, primary ring seal face wear, equipment tolerances, and service life. Seal has optional quench gland (5611Q) with carbon ring throttle bushing. End Play/Axial Float Allowance: 0.13mm/0.005" Nonclogging Single-Coil Spring Positive Mechanical Drive Full Convolution Elastomer Bellows Fits ANSI B73.1M, ISO 3069 and DIN 24960 Seal Chambers Sealol is a registered trademark of John Crane.

Open the catalog to page 1
Type 5611/5611Q - 2

Type 5611/5611Q Elastomer Bellows Seals Basic Pressure Rating Pressure (barg) Pressure (psig) A Carbon vs. Silicon Carbide (1800 rpm) B Silicon Carbide vs. Silicon Carbide (1800 rpm) 1. Lubricating liquid is defined as having lubricating properties of gasoline or better. 2. Pressure capabilities to 28 barg/ 400 psig are based on lubricating oil service, Carbon vs. Silicon Carbide. 3. For sizes above 100mm/4", consult John Crane Engineering. 0 100 (mm) Seal Size The Basic Pressure Rating is for a standard seal, as shown in the typical arrangement, when installed according to the criteria...

Open the catalog to page 2
Type 5611/5611Q - 3

Type 5611/5611Q Elastomer Bellows Seals Type 5611 Typical Arrangement/Dimensional Data L90 MIN. TO NEAREST OBSTRUCTION L39 L23 SLOT WIDTH *Not applicable. Refer to L23 for sizes over 3.000".

Open the catalog to page 3
Type 5611/5611Q - 4

UNIVERSALCARTRIDGE1 Elastomer Bellows Seals Type 5611 Oversize Bore Dimensional Data (inches) "Seal cartridge is OD registered on the turn diam. of 4.125". ***Seal cartridge is OD registered on the turn diam. of 5.125". Type 5611 Dimensional Data (mm) Seal Size *Not applicable. Refer to L23 for sizes over 75mm.

Open the catalog to page 4
Type 5611/5611Q - 5

Type 5611/5611Q Elastomer Bellows Seals Type 5611Q Typical Arrangement/Dimensional Data L90 MIN. TO NEAREST OBSTRUCTION L39 L23 SLOT WIDTH INLET Clockwise Rotation DRAIN (PLUGGED) NOTE: Direction of view is from the driver end of pump. For tangential tappings only. Gland can be rotated to fit both ISO and ANSI pump type. *Not applicable. Refer to L23 for sizes over 75mm.

Open the catalog to page 5
Type 5611/5611Q - 6

UNIVERSALCARTRIDGE" Elastomer Bellows Seals Type 5611Q Oversize Bore Dimensional Data (inches) "Seal cartridge is OD registered on the turn diam. of 4.125". ***Seal cartridge is OD registered on the turn diam. of 5.125". Type 5611Q Dimensional Data (mm) Seal Size *Not applicable. Refer to L23 for sizes over 75mm.

Open the catalog to page 6
Type 5611/5611Q - 7

Type 5611/5611Q Elastomer Bellows Seals Materials of Construction SEAL COMPONENTS Face/Primary Ring Resin-Impregnated Carbon Sintered Silicon Carbide Nickel Binder Tungsten Carbide Seat/Mating Ring Sintered Silicon Carbide Nickel Binder Tungsten Carbide Sleeve Gland Plate Collar Retainer Disc Drive Band Spring Holder Fluoroelastomer Ethylene Propylene Nitrile Neoprene AflasTM Glass-Filled PTFE Resin-Impregnated Carbon Aflas is a trademark of Asahi Glass Co. Ltd.

Open the catalog to page 7
Type 5611/5611Q - 8

Type 5611/5611Q Elastomer Bellows Seals Latin America São Paulo, Brazil Middle East, Africa, Asia Dubai, United Arab Emirates North America Morton Grove, Illinois USA For your nearest John Crane facility, please contact one of the locations above. If the products featured will be used in a potentially dangerous and/or hazardous process, your John Crane representative should be consulted prior to their selection and use. In the interest of continuous development, John Crane Companies reserve the right to alter designs and specifications without prior notice. It is dangerous to smoke while...

Open the catalog to page 8

All John Crane catalogs and technical brochures

  1. Type 28VL

    4 Pages

  2. Type 28VL

    4 Pages

  3. Type 93FR

    4 Pages

  4. Type 28AT

    8 Pages

  5. TYPE 8648VRS

    2 Pages

  6. AURA™

    2 Pages

  7. H-RE

    12 Pages

  8. H-CE

    12 Pages

  9. CPKT

    1 Pages

  10. A series

    8 Pages

  11. TYPE 2800MB

    8 Pages

  12. TYPE 2715T

    8 Pages

  13. TYPE 1670

    4 Pages

  14. G58/G58I

    2 Pages

  15. CVU/CVH

    2 Pages

  16. CPR BUSHING

    4 Pages

  17. TYPE EZ-1®

    8 Pages

  18. GR-2/2C

    2 Pages

  19. GR-1/1C

    2 Pages

  20. LIVE-LOAD

    2 Pages

  21. 1345/1349

    2 Pages

  22. 387I

    2 Pages

  23. TYPE 502

    6 Pages

  24. TYPE 2106

    4 Pages

  25. TYPE 676

    8 Pages

  26. TYPE 2100

    4 Pages

  27. TYPE 21

    6 Pages

  28. TYPE 1/1B

    6 Pages

  29. GR2/2C

    2 Pages

  30. GR1/1C

    2 Pages

  31. GP-S/GP-D

    2 Pages

  32. Type 93FR

    4 Pages

  33. Type 83

    4 Pages

  34. Type 28XP

    6 Pages

  35. Type 28VL

    4 Pages

  36. Type 28ST

    4 Pages

  37. Type 28AT

    6 Pages

  38. CK736/736D

    4 Pages

  39. SEW Ahlstar

    4 Pages

Archived catalogs