video corpo

682 Reservoir
12Pages

{{requestButtons}}

Catalog excerpts

682 Reservoir - 1

Complete Source for Mechanical Seal Support Systems Seal Support Systems >

Open the catalog to page 1
682 Reservoir - 2

John Crane Lemco is your complete source for mechanical seal supportsystems. Providing unrivaled expertise, innovation and reliability, John Crane Lemco is the solution. For over 80 years John Crane has been redefining the limit of seal support technology.John Crane is the acknowledged leader in the design and manufactureof engineered seal support systems. Our customers benefit from our global presence with over 200 facilities throughout the world. > Lemco provides an extensive product offering,covering the complete spectrum of sealing applications from liquids to gasses, cryogenic to...

Open the catalog to page 2
682 Reservoir - 3

Designed and built to industry recognized standards > All systems are designed and built to industry recognized standards such as ANSI B31.3 for piping; API 610, 682, and 614 for system design; IEC, NEMA, NEC, or CSA for instrumentation and electrical. Pressure vessels are built in accordance with ASME requirements and we hold Uђ, UMђ, and Rђ stamps in accordance with Section VIII, Div. 1. All welders are qualified to ASME Section IX.In-house testing capabilitiesinclude hydrostatic and non-destructive examinations, suchas dye penetrant weld examination and positive material identification,...

Open the catalog to page 3
682 Reservoir - 5

Available in 10 and 50 gallon capacity, these portable units provide a means to refill a seal reservoir whilestill in operation. Each unit is complete with an atmospheric reservoir, hand pump, and hose assembly with quick connect end. > 50 Gallon10 Gallon Monel is a registered trademark of Inco Alloys International, Inc. Abrasive separators improve mechanical seal life by cleaning the stream of process fluid used to flush the mechanical seal. John Crane provides a range of separators to suit a variety of pressure, flow, and material requirements.Flow Rate:1 to 33 gpm Materials:316 Stainless...

Open the catalog to page 5
682 Reservoir - 7

Type 2800 Seals Plan 72 or 74 Gas Control Panel Note: API 682 is e quivalent to ISO Standard 20149.

Open the catalog to page 7
682 Reservoir - 8

Primarily for use in Plan 21 and 23 applications, this heat exchanger is alsoavailable in compliance with API 682. Designed for easy installation and maintenance, the HXR model is ideal for Refinery, Petrochemical, ChemicalProcessing, and Pipeline Industries. These heat exchangers can also be incorporated into seal support system packages.Standard Materials: Carbon steel shell with 316 Stainless Steel tube Available Cooling Area: 1.9 Ft > T I 2 2.6 Ft > 2 3.9 Ft > 2 5.9 Ft > 2 2 Primarily for use in Plan 21 and 23 applications, these heat exchangers can also be used as an integral part of a...

Open the catalog to page 8
682 Reservoir - 9

Application-specific control systems ensure a clean, controlled flow of gas to non-contacting seals used in compressor applications, while monitoring seal perfor- mance. John Crane Lemco seal support systems create the ideal seal environment to maximize seal performance, increase seal life, extend Mean Time Between Planned Maintenance, and improve emissions control.John Crane Lemco seal support systemsinclude Type 28XP and 28AT panels in tandem and double configurations.John Crane Lemco works closely with all parties in order to match the proper panel with the application. Each panel is...

Open the catalog to page 9
682 Reservoir - 10

When barrier liquid requirements for dual pressurized seals exceed the capabilities of a traditional Plan 53, a Seal Oil System is used. Designated as Plan 54 by API 682, these systems provide flow and heat removal capabilities exceeding that of a traditional Plan 53 system.Standard units are available in 10, 20, and 30 gallon capacities, with flows ranging from 1.5 to 4.5 gpm,and pressures to 3000 psi.Custom units are available in a wide variety of configurations and can be built to service multiple seals.Available options include: Spare pump assembly Օ Duplex filters with isolation valves...

Open the catalog to page 10
682 Reservoir - 11

Shown with Accumulator Safety PackageCustom Lube Oil Skid System used in mining application, providing seal water to autoclave seals.System supports six dual pressurized seals, consists of bladder accumulators and automated refill system. Our capabilities also include a wide range of custom, closed loop seal oil systems. Used in conjunction withdual pressurized seals, closed loop systems remain under constant pressure and typically provide the means to automatically replenish the barrier fluid as required. 10 >

Open the catalog to page 11

All John Crane catalogs and technical brochures

  1. L SERIES

    8 Pages

  2. Type 28VL

    4 Pages

  3. Type 28VL

    4 Pages

  4. Type 93FR

    4 Pages

  5. Type 28AT

    8 Pages

  6. TYPE 8648VRS

    2 Pages

  7. AURA™

    2 Pages

  8. H-RE

    12 Pages

  9. H-CE

    12 Pages

  10. CPKT

    1 Pages

  11. A series

    8 Pages

  12. TYPE 2800MB

    8 Pages

  13. TYPE 2715T

    8 Pages

  14. TYPE 1670

    4 Pages

  15. G58/G58I

    2 Pages

  16. CVU/CVH

    2 Pages

  17. CPR BUSHING

    4 Pages

  18. TYPE EZ-1®

    8 Pages

  19. GR-2/2C

    2 Pages

  20. GR-1/1C

    2 Pages

  21. LIVE-LOAD

    2 Pages

  22. 1345/1349

    2 Pages

  23. 387I

    2 Pages

  24. TYPE 502

    6 Pages

  25. TYPE 2106

    4 Pages

  26. TYPE 676

    8 Pages

  27. TYPE 2100

    4 Pages

  28. TYPE 21

    6 Pages

  29. TYPE 1/1B

    6 Pages

  30. GR2/2C

    2 Pages

  31. GR1/1C

    2 Pages

  32. GP-S/GP-D

    2 Pages

  33. Type 93FR

    4 Pages

  34. Type 83

    4 Pages

  35. Type 28XP

    6 Pages

  36. Type 28VL

    4 Pages

  37. Type 28ST

    4 Pages

  38. Type 28AT

    6 Pages

  39. CK736/736D

    4 Pages

  40. SEW Ahlstar

    4 Pages

Archived catalogs