Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Johannes Hübner Giessen
  3. Pulse converter
video corpo

Pulse converter

Pulse converter
1 / 2 PagesView full catalog

Pulse converter

Product catalog summary
Overview: The Impulsformer OM3-1 is a pulse converter designed for potential isolation, voltage level conversion, and signal regeneration. It features optocoupler isolation between inputs and outputs, and is equipped with advanced driver ICs for long-distance signal transmission at high frequencies.
Specifications:
  • Input Current: 6mA
  • Output Current (HTL): 60mA (120mA temporarily)
  • Output Current (TTL): RS422A
  • No Load Current: 30mA
  • Frequency Range: 250kHz
Features:
  • Red flashing LED indicates short-circuit or overload, with automatic reset after error correction.
  • Compact modular casing (50mm x 75mm x 52mm) compatible with EN 50 022 standard track rails.
Model Variants:
  • OM3-1-1: HTL input, HTL output, 12V-30V supply
  • OM3-1-2: TTL input, HTL output, 12V-30V supply
  • OM3-1-3: HTL input, TTL output, 5V supply
  • OM3-1-4: TTL input, TTL output, 5V supply
  • OM3-1-5: HTL input, TTL output, 12V-30V supply
  • OM3-1-6: TTL input, TTL output, 12V-30V supply
Connection Diagram: The document includes a connection diagram labeled EL528, detailing the supply voltage, inputs, and outputs for proper installation and operation.
See more

Catalog excerpts

Pulse converter-1

Impulsformer Pulse Converter Type:OM3-1

 Open the catalog to page 1
Pulse converter-2

Die Impulsformer des Typs OM3-1 werden zur Potentialtrennung, Pegelumsetzung und Signalregenerierung eingesetzt. The pulse converter OM3-1 is used for isolated power supply, conversion of voltage level und regeneration of signals. Die Eingänge sind durch Optokoppler von den Ausgängen potentialgetrennt. Die Ausgangsstufen sind mit neuesten Treiber ICs ausgerüstet und ermöglichen Signalübertragungen über große Kabellängen bei hohen Ausgangsfrequenzen. Eine rot blinkende LED signalisiert einen Kurzschluß oder Überlastung der Endstufen. Nach Beseitigung des Fehlers ist der Impulsformer wieder einsatzbereit....

 Open the catalog to page 2

All Johannes Hübner Giessen catalogs and technical brochures

  1. Incremental encoders FG(HJ) 40, FG 40 Ex, FG(H) 41, FG(HJ) INOX
    Incremental encoders FG(HJ) 40, FG 40 Ex, FG(H) 41, FG(HJ) INOX

    24  Pages

  2. A...40/41
    A...40/41

    20  Pages

  3. Looper encoder AL...40
    Looper encoder AL...40

    12  Pages

  4. Electronic overspeed switches EGS® (HJ) 2 / 40 / 41
    Electronic overspeed switches EGS® (HJ) 2 / 40 / 41

    16  Pages

  5. HKS(I) / HKDS(I) Safety Couplings
    HKS(I) / HKDS(I) Safety Couplings

    2  Pages

  6. Simplifying Cranes
    Simplifying Cranes

    12  Pages

  7. FOC transmitter LWL(S)-T / FOC decoder LWLS-D(i)
    FOC transmitter LWL(S)-T / FOC decoder LWLS-D(i)

    16  Pages

  8. ImpulsformerPulse ConverterType:OM3-1
    ImpulsformerPulse ConverterType:OM3-1

    2  Pages

  9. Cable protection systems
    Cable protection systems

    12  Pages

  10. U-ONE®(-SAFETY)-LWL and -Compact
    U-ONE®(-SAFETY)-LWL and -Compact

    36  Pages

  11. U-ONE
    U-ONE

    24  Pages

  12. EGS inquiry form
    EGS inquiry form

    2  Pages

  13. U-ONE Inquiry form
    U-ONE Inquiry form

    2  Pages

  14. U-ONE / U-ONE SAFETY
    U-ONE / U-ONE SAFETY

    8  Pages

  15. A...40/41 Inquiry forms
    A...40/41 Inquiry forms

    2  Pages

  16. MAG inquiry form
    MAG inquiry form

    5  Pages

  17. Incremental encoders inquiry form
    Incremental encoders inquiry form

    2  Pages

  18. DC-Tacho-Generator Type TDP 0,7
    DC-Tacho-Generator Type TDP 0,7

    2  Pages

  19. EDU 100
    EDU 100

    2  Pages

  20. TDP ...
    TDP ...

    4  Pages

  21. Synchron-Servo-Motoren
    Synchron-Servo-Motoren

    6  Pages

  22. DSG P-series
    DSG P-series

    20  Pages

  23. Ex FG 40 inquiry form
    Ex FG 40 inquiry form

    2  Pages

  24. NEWS-Flyer Ex FG 40
    NEWS-Flyer Ex FG 40

    2  Pages

  25. Program overview
    Program overview

    6  Pages

  26. G ... / GN ... Inquiry form
    G ... / GN ... Inquiry form

    2  Pages

  27. DSG P ... Inquiry form
    DSG P ... Inquiry form

    2  Pages

  28. Hollow-shaft assembly ... Inquiry form
    Hollow-shaft assembly ... Inquiry form

    2  Pages

  29. Hollow-shaft assembly incorporating fault exclusion
    Hollow-shaft assembly incorporating fault exclusion

    2  Pages

  30. Bracket arms
    Bracket arms

    8  Pages

  31. Couplings
    Couplings

    20  Pages

  32. Frequency voltage converter
    Frequency voltage converter

    8  Pages

  33. Output multipliers
    Output multipliers

    10  Pages

  34. FOC Accessories
    FOC Accessories

    16  Pages

  35. DSG P ... (Generators)
    DSG P ... (Generators)

    20  Pages

  36. G ... / GN ... (DC motors)
    G ... / GN ... (DC motors)

    16  Pages

  37. MGDDP
    MGDDP

    4  Pages

  38. TDP H 439 H
    TDP H 439 H

    8  Pages

  39. TDP 439 H
    TDP 439 H

    4  Pages

  40. TDP 0,7 SE
    TDP 0,7 SE

    1  Page

  41. AMPNH 41
    AMPNH 41

    2  Pages

  42. AMPN 41
    AMPN 41

    2  Pages

  43. AMPH 41
    AMPH 41

    2  Pages

  44. AMP 41
    AMP 41

    2  Pages

  45. FGH 5-6-8-14-20
    FGH 5-6-8-14-20

    76  Pages

  46. Image brochure
    Image brochure

    16  Pages

  47. Crane and harbor technology
    Crane and harbor technology

    8  Pages

Archived catalogs

  1. Tacho generators TDP
    Tacho generators TDP

    8  Pages

  2. FG(HJ) 2
    FG(HJ) 2

    12  Pages

  3. Bearing-free magnetic encoder systems MAG(A)
    Bearing-free magnetic encoder systems MAG(A)

    20  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.