AMPN 41
2Pages

{{requestButtons}}

Catalog excerpts

AMPN 41 - 1

Absolute Encoder AMPN 41 – PROFINET IO / PROFIsafe  PROFINET IO interface with PROFIsafe protocol  Type with solid shaft  Functional safety according to - EN 61508: - EN ISO 13849: 13 Bit resolution, 32768 revolutions Incremental signals for position feedback, 4096 pulses Construction types B5 (flange) and B35 (flange and foot) Degree of protection: IP54 (labyrinth seal) and IP66 (axial shaft seal) Electrical Data Supply voltage Current consumption without load Singleturn resolution Multiturn resolution Output code Additional features Incremental output without reference pulse Cycle Time Transmission rate velocity output in increments/integration time, safe Safety principle 2 redundant scanning systems with internal cross comparison Safety of the total system - T1, proof test - PFH, "High demand" operating mode - PFDav (T = 20 a) - MTTFd high - DCavg high Parameter1) - Integration time, safe / unsafe - Size of monitoring window - Standstill tolerance Preset - Direction of counting 50 ms…500 ms / 5 ms…500 ms 50…4000 increments 1…5 increments/integration time, safe Forward, Backward secured programmable parameter Mechanical Data Mass - Construction type B5 - Construction type B35 Mechanically permissible speed - Degree of protection IP54 - Degree of protection IP66 Rotor moment of inertia - Degree of protection IP54 - Degree of protection IP66 approx. 400 gcm² approx. 330 gcm² Breakaway torque - Degree of protection IP54 - Degree of protection IP66 Johannes Huebner Fabrik elektrischer Maschinen GmbH Siemensstrasse 7 35394 Giessen / GERMANY Modifications reserved

Open the catalog to page 1
AMPN 41 - 2

Absolute Encoder AMPN 41 – PROFINET IO / PROFIsafe Environmental conditions Vibration resistance, EN 60068-2-6:2008 EMC - Immunity to disturbance - Transient emissions Encoder temperature range Storage temperature - IP54 with labyrinth seal - IP66 with axial shaft seal valid with screwed on mating connector Johannes Huebner Fabrik elektrischer Maschinen GmbH Siemensstrasse 7 35394 Giessen / GERMANY Modifications reserved

Open the catalog to page 2

All Johannes Hübner Giessen catalogs and technical brochures

  1. U-ONE

    24 Pages

  2. A...40/41

    20 Pages

  3. FG(HJ) 2

    12 Pages

  4. EDU 100

    2 Pages

  5. TDP ...

    4 Pages

  6. DSG P-series

    20 Pages

  7. Bracket arms

    8 Pages

  8. Couplings

    20 Pages

  9. MGDDP

    4 Pages

  10. GDDP

    6 Pages

  11. TDP H 439 H

    8 Pages

  12. TDP 439 H

    4 Pages

  13. TDP 0,7 SE

    1 Pages

  14. AMPNH 41

    2 Pages

  15. AMPH 41

    2 Pages

  16. AMP 41

    2 Pages

  17. Image brochure

    16 Pages