Catalogs >
JÖST >
ZUFS sand attrition unit

ZUFS sand attrition unit
1Pages

Catalog excerpts

Sand attrition units type ZUFS are very powerful and compact machines for chemically bonded mould and core sand. These proved and tested machines are often used in well-known foundries. Generally the sand attrition units are integrated in sand reclamation plants between shake-out and sand cooler. Powerful, linear vibrations are disintegrating the lumps in the attrition sink and repulverize them to sand. Following the attrition sink the oversize grains are screened out. Properties: + Long lifetime of the lining parts and the grid of the attrition sink + Attrition sink consists of highly wear-resistant steel casting grids + Downwards directed conical tapered screening apertures avoid choking + Fine screen for oversize grain, situated at the exit of the machine, is easily accessible + Oversize grains are conveyed through separate opening (optionally left or right), therefore no accumulation of oversize grain in the machine + Coarse material will be discharged automatically through the rearend flap by means of reversed conveying direction + Access to the inner parts of the device trough the rearend flap Nobake Sandsystem organic 40% lumps 50% lumps 100% lumps 60% sand 50% sand 0% sand Thermally treated strong medium low Width Drives Performance Weight Exhaust air Performance Performance Performance [m3/h] [t/h] [t/h] [t/h] JOST GmbH + Co. KG Gewerbestrasse 28-32 48249 Dulmen Fon +49 2590 98-0 www.joest.com info@joest.com

Open the catalog to page 1