Air separation Table
2Pages

{{requestButtons}}

Catalog excerpts

Air separation Table - 1

The Air Separation Table from JOEST is used when dry and free flowing bulk material (0,5 to 20 mm) needs to be sorted. Impor- tant for the sorting is the relative density difference but also the shape and the size of the pieces. The material is fed via a vibrating product intake being distributed on the whole width of the machine. Very light particles are directly conveyed to the light fraction discharge by means of a continuously adjustable sorting flap. This enables a more effective swim-sink-process. The combination of the vibration of the table and the air flow from below the screen plate nearly eliminates the friction of the particles. The particle mass thereby behaves like a fluid. The more heavy particles sink while the light pieces The separation table is executed in an upwards direction. The sinking heavy grains are conveyed upwards to the upper dis- charge because of the vibrating process (linear motion). At the end of the perforated plate on the heavy side is an infinitively adjustable flap. At this flap the remaining light particles will be blown back to the main product mass. The floating lighter particles follow the incline down to the lower discharge and will be carried out over a weir. The dusty discharged air from the separation table is cleaned by a cyclone and/or filter. + Very high selectivity because of excellent air distribution by means of fluid plate. + High throughput because of integrated cross flow sorting + High availability through a single-chamber-system and the use of a fluid plate (almost no jamming of product) + Constant operating condition also with slightly changing mass flow and material composition + Very robust construction + Easy accessibility and cleaning possibilities Industrial Waste ■ K-Separator (on top of the aspiration cover) ■ Cyclone / Dedusting Installation with Aspiriation Socket ■ Special Construction possible three parallel product fractions) 'Alliance Member

Open the catalog to page 1
Air separation Table - 2

TECHNICAL DATA without dosing data unit (all values are approximate) * According to properties of mixture to be separated ^JOST group SYSTEMS ENGINEERING El Separation Table with Extricable Fluid Plate Unit □ Aspiration Socket with Compensator El Dosing Feeder with Magnet Drive and Thyristor Control (option) El Feed Hopper with Filling Level Control (option) I Pressure-side radial ventilator with silencer, intake filter and pipe connection to settling table

Open the catalog to page 2

All JÖST catalogs and technical brochures

  1. recycling

    6 Pages

  2. JT.006.10.04

    1 Pages

  3. JT.007.12.02

    1 Pages

  4. JT.004.10.04

    1 Pages

  5. JT.002.10.05

    1 Pages

  6. JT.003.01.01

    1 Pages

  7. JT.008.11.05

    1 Pages

Archived catalogs