video corpo

Flow control valve NG 6


Catalog excerpts

Flow control valve NG 6 - 1

VOITH Technical data sheet Flow control valve NG 6, stepper-motor controlled Advantages + Reproducibility even with low flow rates up to 5 cm3/min + Nearly pressure and viscosity independently flow control + High setting accuracy + Resolution 0.075% + Control range 0 to 100% + Electric position feedback + Integrated electronics (digital or analog control) + Port connection according to ISO 4401 + Optional with electric break

Open the catalog to page 1
Flow control valve NG 6 - 2

Port connection pattern NG 6 ISO 4401 P A T B F1 F2 F3 For connection of the flow control valve, the ports A and B are used. Various single and multiple mounting plates are available. F: M5, thread depth min. 1.5 x 0 G: hole depth min. 1.5 x 0 The figure shows the side of the mounting plate to wich the valve is fastened.

Open the catalog to page 2
Flow control valve NG 6 - 3

Circular plug-in connector 17-pole Genaral Type Control Angle of rotation, 1 rotation Valve mounting Connections of port Mounting position Ambient temperature Mass valve Hydraulic Operation pressure A, B Hydraulic oil temperature Viscosity range Rate of flow Electric Power supply, DC Current consumption without break Current consumption with break Setpoint Setpoint setting digital (option) stepper motor 5 VS- reference nominal value mounting plate Control speed 24 V, 10% max. 0,6 A max 1,1 A 0 bis 10 V up/down, CAN Bus, Profibus approx. 200 ms at 100% adjustment Circon M23

Open the catalog to page 3
Flow control valve NG 6 - 4

Design code Design Volume flow max. volume flow code 20213-SRVSM6-DSH_EN_200617. All data and information without obligation. Subject to change. Nominal size Symbol Flow control valve stepper motor controlled Material number Voith Group St. Poeltener Str. 43 89522 Heidenheim Germany

Open the catalog to page 4

All J.M. Voith SE & Co. KG catalogs and technical brochures