Model3614 RS - IITELEHANDLER
2Pages

Performance Rated Capacity Maximum Lift Height Load at Max Height Load at Max Reach Frame Leveling Lift Speed (boom retracted) Up Down Boom Speed (extended/retracted) Extended Retracted Max. crowd Max. dump Top Travel Speed Engine: Breakout force Outside Turning Radius (over tyres) Operating Weight Standard Specifications Hydraulic System-Implement Engine Make and Model No. of Cylinders Displacement Standard engine gross power Maximum torque at 1300 RPM Fuel Tank Capacity • 3 speed forward and reverse Power shift. (1st: 5 km/h, 2nd: 9 km/h, 3rd: 19 km/h) Axles • Trunnion mounted planetary steer axles • High bias limited slip differential on front axle • Integral steer cylinder • Pump type: Gear pump • Maximum pump flow 100 L/min • Auxiliary hydraulic flow - intermittant 100 L/min Accessories & Options • Air conditioning (optional) • Frame leveling • Road lights • Rear retrieval hitch (optional) • Stabilisers • Rotating beacon (optional) • Load stability indicator (LSI) • Roof Wiper • Cab work lights • EROPS and FOPS fully glazed all weather cab • 2 way adjustable mechanical suspension seat Steering 4-Wheel • Power steering with steering wheel spinner • Two wheel/four wheel/crab steer with push button select facility Instruments • Water temperature gauge • Right-hand tilt and sway lever • Boom lift and crowd on single joystick Standard: Standard carriage Standard coupler Pallet fork (4000 kg) Optional: Digging Bucket 4-1 Bucket Light material bucket Lifting Hook Truss Boom • Service brakes are inboard, wet disc brakes on front and rear axle • Internal wet disk on front axle • Service brakes servo assisted • Park brake-mechanical on front axle • Maintenance indicator • Fuel gauge • Hour meter

DRAWING NUMBER Load Chart and Dimensions All dimensions are approximate. Rated lift capacities shown are with machine equipped with carriage and pallet forks. The machine must be level on a firm surface with undamaged, properly inflated tyres. Machine specifications and stability are based on rated lift capacities at specific boom angles and boom lengths. (If specifications are critical, the proposed application should be discussed with your dealer.) DO NOT exceed rated lift capacity loads, as unstable and dangerous machine conditions will result. DO NOT tip the machine forward to determine...