JK technic - Parc Industriel Sud - ZI Edison Rue Abbé Louis Verdet - 57200 Sarreguemines - France e-mail : [email protected] - Internet : www.jktechnic.com technical data sheet A JK technic’s press-welded grating is obtained through a process during which the transverse bars are wrought into crimped squares over the bearing bars. • Manufacturing of meshes · Safety meshes: 19 x 40 - 30 x 19. · EDF Mesh 30 x 27. · Maximun length of the bearing bars: 6,100 mm. · Maximun length of the transverse bars: 1,000 mM or more (on demand). · Thickness of the bearing bars: 25/2 to 60/5. · Transverse bar’s crimped square: 4 to 6 mm. · Serrations of the BB on demand. • Range • Finished products Customised manufacturing according to the dimensions pointed out by the customer’s research team or directly by JK technic’s internal team. Standard gratings and steps (please refer to: stocked products). • Semi-finished products • Standard manufacturing method • Step 3 JK technic’s pressed gratings are manufactured using techniques that allow for a top quality production (NF EN ISO 14 122-2 regulations). The material generally used to manufacture gratings is steel (S 235 JR). During the manufacturing process the transverse bars are inserted into the bearing bars. The product thus obtained can be hot-galvanised, in compliance with EN ISO 1461 regulations. • Serrations Single serration available • Safety mesh Safety mesh is sealed through a 20 mm diameter ball The black or galvanised mats or half-mats allow for an easy on site transformation (please refer to: stocked products).

JK technic - Parc Industriel Sud - ZI Edison Rue Abbé Louis Verdet - 57200 Sarreguemines - France e-mail : [email protected] - Internet : www.jktechnic.com stocked products Mats - Half-mats Standard gratings CONCEPTION-REALISATION : MPRSA - +352 26 92 37 26 - RCS : 2003-22-01-505 - Crédits photo : GraphicObession Stock express All products labelled with a yellow tag are sent on the same day an order is placed, provided that it is placed before 10.00 am.