JK technic - Parc Industriel Sud - ZI Edison Rue Abbé Louis Verdet - 57200 Sarreguemines - France e-mail : [email protected] - Internet : www.jktechnic.com technical data sheet Press-welded or Pressed Our gratings for shelving are extremely firm and stable and they allow for a better visibility of the stocked products. • Maximum dimensions Please contact us... • Cross section of the bearing bars Height of the bearing bar: 20 to 150 mm. Thickness of the bearing bar: 2 to 8 mm. • Mesh’s base Bearing bars and transverse bars have the same height; this allows for a great load capacity in both directions. In addition, they are extremely resistant to frictions, which makes them ideal for intensive use. Thickness of the BBs 2 and 3 mm The base of the BBs is generally a multiple of 11. The base of the TBs is generally a multiple of 11.1. Thickness of the BBs 4 and 5 mm The base of the BBs is generally a multiple of 18. The base of the TBs is generally a multiple of 17. • Standard manufaturing JK technic’s pressed gratings are manufactured using techniques that allow for a top quality production (NF EN ISO 14 122-2 regulations). The material generally used to manufacture open floor gratings is steel (S 235 JR). During the manufacturing process the transverse bars are inserted into the bearing bars. The product thus obtained can be hot-galvanised, in compliance with EN ISO 1461 regulations.

JK technic - Parc Industriel Sud - ZI Edison Rue Abbé Louis Verdet - 57200 Sarreguemines - France e-mail : [email protected] - Internet : www.jktechnic.com material : S235 JR following norm EN 10025 galvanisation : following norm EN ISO 1461 Stock express : All products labelled with a yellow tag are sent on the same day an order is placed, provided that it is placed before 10.00 am. CONCEPTION-REALISATION : MPRSA - +352 26 92 37 26 - RCS : 2003-22-01-505 - Crédits photo : GraphicObession for shelving technical data sheet material : S235 JR following norm EN 10025 galvanisation : following...