JK technic - Parc Industriel Sud - ZI Edison Rue Abbé Louis Verdet - 57200 Sarreguemines - France e-mail : [email protected] - Internet : www.jktechnic.com with inclined technical data sheet Gratings with transverse inclined blades are used for both frontages and floorings, becoming visual screens, sunshades and, when used as floorings, devices that help avoid the ”empty” sensation. CONCEPTION-REALISATION : MPRSA - +352 26 92 37 26 - RCS : 2003-22-01-505 - Crédits photo : GraphicObession The direction of the inclination is mandatory in gratings with cuttings. • Borders and finishing Border perpendicular to the bearing bars Without border Direction of the inclination of the inclined blades Load-bearing direction • Fastening Fastening devices are made of zinc-coated steel for steel gratings, and stainless steel for stainless steel and aluminium gratings. Gratings can be fastened with plates welded on them. • We can manufacture gratings with transverse inclined blades for bearing bars whose thickness is 2 to 3 mm. Be careful !!! Base of the BB (available sizes): 33.3 mm - 44.4 mm - 55.5 mm - 66.6 mm - 100 mm. Inclined transverse base (available sizes): 33.3 mm - 44.4 mm - 55.5 mm - 66.6 mm - 100 mm. For the maximum base sizes we can manufacture and for more meshes, please contact us. Bearing bars (height in mm) 2 - If you want to obtain a visual effect with a homogeneous mesh, we suggest you calculate by yourself the dimensions your grating should have (both the weight it can carry and its width). 1 - If the panels are placed side by side, you should choose gratings without border or with the border perpendicular to the bearing bars in order to allow for a better visual effect. We can manufacture this type of grating in steel (S235 JR), stainless steel (304 and 316) and in aluminium (AIMg 3).