*mydirectindustry

6VSC

Product catalog summary

Product Overview: The document details the specifications and usage of 6-flute corner radius end mills designed for machining steel, cast irons, and stainless steels. These tools are characterized by their high efficiency and universal application.

Specifications: The end mills come in various diameters ranging from 6mm to 20mm, with corner radii from R0.5 to R5. The overall lengths vary from 60mm to 100mm, and the shank diameters correspond to the tool diameter. The tools are designed with a 45° helix angle, enhancing their suitability for high-speed machining.

Material and Coating: These end mills are suitable for mid-low hardened steels (up to HRc42), mild steels, cast irons, and stainless steels. They feature HR coating, which reduces stress on the cutting edge and improves wear resistance.

Usage Recommendations: It is advised to enter the tool from outside the workpiece to minimize stress. If the tool's diameter or effective length is not listed, adjustments should be made based on similar values. Non-contact methods are recommended for measuring the tool to avoid damage. The document provides guidelines for adjusting RPM and feed rates based on machining conditions and machine capabilities.

Cutting Conditions: The document includes detailed tables for RPM and feed rates for various materials and tool diameters. It specifies axial and radial depths of cut for different machining scenarios, emphasizing the importance of using machines with low vibration and good rigidity.

Cooling and Chip Management: Air blow, oil mist, or coolant is recommended to manage heat and chip removal effectively. Attention should be paid to chip emission and potential ignition during machining.

Material Compatibility: The end mills are compatible with structural steels, carbon steels, gray cast irons, titanium alloy steels, tool steels, mold steels, stainless steels, and heat-resistant alloys.

Catalog excerpts

6 Flutes Various Symmetry Corner R End Mills for Steel, Cast Irons & Stainless Steels 6날 고능률 범용 코너 레디우스 엔드밀 • 중저경도강(HRc 42이하), 연강, 주철, SUS계열 가공 엔드밀 • HR코팅 처리하여 다양한 피삭재 가공시 인선부에 스트레스가 적으며 내마모성 또한 향상 됩니다. • 45° 헬릭스 형상으로 설계하여 고속, 고이송 가공에 적합 합니다. • Mid-low hardened steels(~HRc42), Mild steels, Cast irons, SUS • HR coating reduces stress of flute and enhances wear resistance. • 45° helix design is suitable for high speed machining. Order Number Overall Length

Open the catalog to page 1

Structural steels / Carbon Steels /Gray cast irons Tool steels / Mold steels Titanium alloy steels Heat Resistance Alloys Side Milling •Ap : Axial Depth •Ae : Radial Depth Side Milling •Ap : Axial Depth •Ae : Radial Depth 가공 진입시 가능 한 피삭재 밖에서 진입 하십시오. 절삭 조건이 없는 직경 및 유효장은 비슷한 직경 및 유효장에 비례하여 UP&DOWN 하여 설정 하십시오 날 끝이 정밀하게 연삭되어 있습니다. 파손을 피하기 위해 가능하면 비접촉 방식으로 측정하십시오. 상기 절삭조건은 참고 수치이므로 실 가공시 가공 형상 , 가공 목적, 적용 기계에 따라 조건 변경 요망 합니다. 조건표가 기계의 최대 스핀들 속도를 초과하거나 버 및 적열 현상이 발생할 때 스핀들 속도와 이송 속도를 비례하여 조정하십시오. 진동이 적고 강성이 좋은 공작기계 사용 요망합니다 (ø1 이하 사용시 진동 허용 관리 5㎛이내일것) 에어브로, 절삭유, 오일 미스트 쿨런트를 추천하며, 칩을 잘 제거하고 가공시 발열과...

Open the catalog to page 2