*mydirectindustry

4SLE

Product catalog summary

Specifications:
The document details the specifications for 4 Flutes High-Speed Slotting End Mills designed for machining various hard-to-cut materials such as alloy steels, SUS, Inconel, and mild steels. The end mills are available in various diameters ranging from 1mm to 20mm, with corresponding lengths of cut, overall lengths, and shank diameters. Each specification is associated with a unique order number.

Features and Benefits:
- Designed for both finishing and roughing operations.
- Excellent chip emission due to double core design, reducing chattering.
- TISIN-R coating enhances wear resistance and reduces edge stress.
- Made from high TRS fine WC grade to minimize fracturing.

Cutting Conditions and Recommendations:
- Enter the tool from outside the workpiece.
- Adjust parameters based on machining geometry and purpose.
- Use machines with low vibration and good rigidity.
- Recommended use of air blow or mist coolants to manage chip emission and heat.
- If effective length is long, reduce RPM and feed proportionally.

Material Specific Guidelines:
The document provides detailed cutting conditions for different materials, including structural steels, carbon steels, stainless steels, titanium alloys, and heat-resistant alloys. It specifies RPM and feed rates for various diameters and depths of cut.

Tolerances:
- Diameter tolerances are specified for different size ranges, ensuring precision in machining operations.

Additional Notes:
- Use non-contact measuring methods to avoid damaging the tool flutes.
- Adjust RPM and feed if the machine's maximum spindle speed is exceeded or if overheating occurs.

Catalog excerpts

4 Flutes High Speed Sloting End Mills for SUS 4날 고속 슬로팅 가공 엔드밀 • 합금강, SUS계열, 인코넬, 일반구조강 등 다양한 난삭재 정삭, 황삭 가공 • 슬롯팅 가공시 2중의 옆날 홈으로 칩 배출이 우수하며, 두터운 2중의 코어는 흔들림 없는 가공을 구현합니다. • TISIN-R 코팅 처리하여 다양한 피삭재 가공시 인선부에 스트레스가 적으며, 내마모성 또한 향상됩니다. • 항절력이 높은 미립자 초경합금(0.5㎛)을 채택, 엔드밀의 파손을 최소화. • Endmills for finishing and roughing of alloy steels, SUS, Inconel, Mild steels and various hard-to-cut materials. • Chip emission is excellent for slotting, and thick double core designed enables continuous machining without chattering. • Minimize fracturing by high TRS fine(0.5㎛) WC grade. • TISIN-R coating provides wear resistance improvement as well as avoid edge stress in various applications. Order Number

Open the catalog to page 1

Structural steels / Carbon Steels /Gray cast irons Tool steels / Mold steels Titanium alloy steels Heat Resistance Alloys Axial Depth Radial Depth Axial Depth Radial Depth Stainless Steels Axial Depth Radial Depth Axial Depth Radial Depth Axial Depth Radial Depth Outside Diameter Side Milling •Ap : Axial Depth •Ae : Radial Depth Side Milling •Ap : Axial Depth •Ae : Radial Depth 가공 진입시 가능 한 피삭재 밖에서 진입 하십시오. 절삭 조건이 없는 직경 및 유효장은 비슷한 직경 및 유효장에 비례하여 UP&DOWN 하여 설정 하십시오 날 경의 코너C 대비 Ae 값을 설정 하십시오. 상기 절삭조건은 참고 수치이므로 실 가공시 가공 형상 , 가공 목적, 적용 기계에 따라 조건 변경 요망 합니다. 조건표가 기계의 최대 스핀들 속도를 초과하거나 버 및 적열 현상이 발생할...

Open the catalog to page 2