JJTCT Thermal Cycling Tester The Thermal Cycling Tester is mainly used to determine the leakage status of composite pipes & fittings when subjected to specified eye specified internal pressure load. Thermal Cycling Tester consists of following elements: 1 .Sample chamber 2.Cold water tank (with chiller & heat exchanger), hot water tank with heaters 3. Electric control panel 4. Flow measurement and regulation (optional) 1. High temperature and high pressure only exsit in the sample and short piping, that all the electric parts in circulation line work at normal pressure to attain a long service life. 2. Lockable transparent folding doors make samples installation more easily and allow easy access to all samples from three sides. 3. Testing control and monitoring of individually station takes over PLC and touch screen terminal. Testing results are easily transferred to Microsoft Excel for further processing. 4. Individual circulation time, flow rate and pressure can be selected. 5. It provides the test constancy as regards to temperature, pressure and flow rate as well as lowering the energy consumption. 04 I Testing Equipments for Plastics Pipes

6. Several reliable safeguard, e.g. liquid level measuring devices, emergency stop switch and cord switch ensure the tester to be out of action in time if the test fails or piping system bursts. Doors shall be locked during testing period 7. High quality Grundfoss pumps are used to provide pressure in sample strings. Automatic water filling design ensures full tank capacity during the whole time. 8.Pre-stress system was introduced to apply the initial tensile stress (optional). 9. Quick calibration. System enables pressure calibration and temperature calibration during testing , it means that...