Catalogs >
Jinan Rainbow Technology Co.,Ltd >
VOC air quality sensor

VOC air quality sensor
3Pages

Catalog excerpts

General Description SI013V is a miniature metal oxide semiconductor gas sensor based on ME MS micro hotplate technology for detection of organic volatile compounds (VOCs) in air. Sensor production combined with silicon substrate ME MS technology, thin film technology, thick film technology, ceramic packaging technology. The nano gas sensitive layer is deposited at the top of the hotplate and intendigitated electrodes, resulting in a conductivity dependent cm the concentration of harmful gases, Features: > High sensitivity to VOCs{ O.I-IOOOppm ) > Very low power consumption { 32-36mW ) > Small size (3.8mm x 3.8mm x 1,5mm) > Long operating life ( -10 Years ) > Reflow soldering Applications: > Indoor harmful gas detection r Alcohol detection > loT. wearable devices, smart home Performance parameter Jinan Rainbow Technology Co.,ltd Pin connections Pin Function 1 Heater Electrode 1

Open the catalog to page 1

Heater Circuit Jinan Rainbow Technology Co.,ltd Remarks: R1: 43-680. In order to maximize the performance advantages of the gas sensor, the temperature compensation design of the heating circuit can be carried out. Please contact us for more detailed information.

Open the catalog to page 2

Sensitivity characteristics Temperature and humidity dependence Please read the following terms carefully to avoid product data errors and prevent product damage 1, The gas sensor must be reflow soldering in neutral atmosphere. The welding furnace should have sufficient flow of clean air to maintain the air clean. The maximum temperature is 260 C. Manual soldering conditions are recommended for a maximum temperature of 350 °C for 5 seconds. 2, Products should not be exposed to high concentrations of organic solvent vapor, silicone vapor, in order to prevent sensitive material poisoning . 3,...

Open the catalog to page 3