Application field - Medical Line &Care Line preferably in in the hospital and nursing beds As the first T series control box,JCB35T is mainly used in the medical and nursing beds. JCB35T is equipped with suitable and optimized SMPS(switching mode power supply )worldwide, It is available for following specifications for flexibility: JCB35T-0(A)-1; JCB35T-0(A)-2; JCB35T-0(A)-3; JCB35T-0(A)-4; JCB35T-0-5. JCB35T has an elegant and compact design. The sliding block can be locked to the platform by screws,or can be fixed to several actuators by special mounting brackets. General Features Power: Power Indicator: Actuator Port: Hand Control Port: Battery Port: Standby Power Consumption: Colour: Control Concept: Duty Cycle: Weight: Compatibility: Battery Management: Protection Class: Maximum Current: Power Management: Safety Protection: Installation: Pull-out Protection: Approval: Input 100-240VAC ,50/60HZ; Rated output 58W and 180W under working mode Yes Max.4channels, 4 Pin Din connector 1 channel, 8 Pin Din connector 1 channel, 6 Pin Din connector (when actuator doesn’t work -output 1mA) Max. 1W (230V) Gray Relay, the life-time exceeds 20,000cycles 10%, max. continuous work for 2min. and 18 min. off (180W at 25°C for 120 seconds) 0.6kg General actuators or columns with limit switch The power supply of the battery can be cut off at low voltage, and there is charge and discharge management inside the battery Max. IPX6 Total 10A for all channels Yes. Ensuring max. power operation and limit max. output power. SMPS overheat protection / Overheat protection With actuators via special mounting brackets; bed frame via screws Yes IEC60601-1 edition3.1 | EMC: IEC60601-1-2 AN SI/AA MIES60601-1:2005/(R)2012 | CSA CAN/CSA-C22.2NO. 60601-1:14

O JIECANGUsage Operating Temperature: +5 °C to +40C Relative Humidity: 20% to 80%, non-condensing Ordering Key Take JCB35TA43GT0050100017 as an example

Diagram-system overview Installation Mounting brackets 48

Dimensions of JCB35T with linear actuators JCB35T installing with actuator JC35L29

Cable exit Mounting screw (cable locker can be removed) It is recommended to install the JCB35T where the water can be drained. Suggested screw installation torque: 0.6Nm +/-0.1 JCB35T can be installed to the bed frame or any other applications according to one of the following installation instructions: 1) M5 screw+ M5 screw nut. Place M5 screw nut on the screw holes on the slide-on bracket, and fix it with M5 screws. 2) Fix the slide-on bracket with M5 screws + flat washer+ screw nut. 3) Fix the slide-on bracket to the frame with tapping screws.

O JIECANGPull-out Protection and Cable ManagementLinear actuator cable locking The control box JCB35T has a uniquely designed cable cover. When it is equipped, it acts as an integrated actuator cable lock. 1. Connect the actuator with the control box 2. Equipping the cable cover until it snaps into place.(please refer to the below illustration) LED indication JCB35T has a green LED power indicator. When JCB35T is successfully connected to the power, the LED indicator is on.

O JIECANGStrictly abiding by medical safety certifications Passed EMC tests. To ensure our products pass all kinds of tests domestic or abroad. Communication protocol development Aiming at different applications, develop more extensive functions for control system. Professional customization Powerful R&D strength, fully satisfy customers’ needs. Development cycle is about 10 days, seizing more market opportunities Intelligent Control of Bluetooth Mobile phone as the remote, applying in home care. Market pioneer, Jiecang provides better choices Controllers adopt high-frequency wireless system....