*mydirectindustry

Catalogs
Jiecang Linear Motion
JIECANG Control Box JCB35R

JIECANG Control Box JCB35R

Product catalog summary

General Features:
The JCB35R control box is designed for medical applications, particularly in hospitals and nursing beds. It supports input power of 100-240 VAC and outputs 200W and 320W in working mode. It features a power indicator, supports up to 7 channels, and includes safety protections such as SMPS overheat and over-current protection. The device is lightweight at 0.9kg and has a protection class of Max.IPX6. It complies with standards like IEC60601-1 edition 3.1 and EMC: IEC60601-1-2.

Dimensions and Usage:
The control box operates within a temperature range of +5℃ to +40℃ and can be stored between -10℃ to +50℃. It functions effectively at altitudes up to 2000m and within atmospheric pressures of 860 to 1060 hPa. The relative humidity should be between 20% to 80%, non-condensing.

Installation:
Installation of the JCB35R should allow for water drainage. It can be mounted using M5 screws and nuts, with a recommended torque of 0.6Nm +/-0.1. The control box can be attached to bed frames or other applications using various methods, including slide-on brackets and tapping screws.

Pull-out Protection and Cable Management:
The JCB35R features a cable cover that acts as an actuator cable lock. It includes a green LED power indicator that lights up when connected to power.

Disclaimer and Exclusion of Liability:
JIECANG emphasizes that users must determine the suitability of their products for specific conditions. Product information is subject to change without notice, and JIECANG cannot guarantee delivery capacity or the correctness of product information. Sales are subject to JIECANG's sales and delivery standard clauses.

Additional Features:
The control box supports communication protocol development, professional customization, intelligent Bluetooth control, wireless communication, and the latest weighing system.

Catalog excerpts

JCB35R Control box Application field - Medical Line preferably in hospitals and nursing beds, operation tables. The control box JCB35R was introduced to achieve a powerful and optimized solution for customers looking for intricate systems. Utilizing existing system, JCB35R is also available for CAN bus technology, expanding functions of the whole systems.Powerful and light SMPS of 200W and exchangeable power cables make it easy to exchange cables due to wear and ensure worldwide compatibility. Parallel driving between actuators are also can be achieved by control box JCB35R. General Features Power: Power Indicator: Input 100-240 VAC,50/60 HZ;Rated output 200W and 320W under working mode Yes Actuator Port: Hand Control Port: Battery Port: Standby Power Consumption: Colour: Control Concept: Duty Cycle: Weight: Protection Class: Max. Current Of Single Channel: Single Channel Max Current: Safety Protection: Safety System: Pull-out Protection: Approval: 1 channel, 6 Pin Din connector Maximum 1w (230v) Gray I Black Relay, service life exceeds 20000cycles 10%, max. continuous work for 2min. and 18 min. off (180wat25c for 120 seconds) 0.9kg Max.IPX6 7 ± 0.5A Yes. Ensuring max. power operation and limit max. output power. SMPS overheat protection / over-current protection Bed frame via screws Yes IEC60601-1 edition3.1 | EMC: IEC60601-1-2 EN60601-1-2: 2015 ANSI/AAMI ES60601-1 | CSA CAN/CSA-C22.2NO. 60601-1:14

Open the catalog to page 1

Usage Operating Temperature: Storage Temperature: Relative Humidity: Atmospheric Pressure:

Open the catalog to page 2

O JIECANGOrdering Key Take JCB35RAM43GR00861000314 as an example

Open the catalog to page 3

O JIECANGInstallationInstalling JCB35R to the frame It is recommended to install the JCB35R where the water can be drained. Suggested screw installation torque: 0.6Nm +/-0.1 JCB35R can be installed to the bed frame or any other applications according to one of the following installation instructions: 1) M5 screw+ M5 screw nut. Place M5 screw nut on the screw holes on the slide-on bracket, and fix it with M5 screws. 2) Fix the slide-on bracket with M5 screws + flat washer+ screw nut. 3) Fix the slide-on bracket to the frame with tapping screws.

Open the catalog to page 4

Pull-out Protection and Cable Management Linear actuator cable locking The control box JCB35R has a uniquely designed cable cover. When it is equipped, it acts as an integrated actuator cable lock. 1. Connect the actuator with the control box 2. Equipping the cable cover until it snaps into place.(please refer to the below illustration) LED indication JCB35R has a green LED power indicator. When JCB35R is successfully connected to the power, the LED indicator is on.

Open the catalog to page 5

O JIECANGStrictly abiding by medical safety certifications Passed EMC tests. To ensure our products pass all kinds of tests domestic or abroad. Communication protocol development Aiming at different applications, develop more extensive functions for control system. Professional customization Powerful R&D strength, fully satisfy customers’ needs. Development cycle is about 10 days, seizing more market opportunities Intelligent Control of Bluetooth Mobile phone as the remote, applying in home care. Market pioneer, Jiecang provides better choices Controllers adopt high-frequency wireless system....

Open the catalog to page 6

JIECANG Control Box JCB35R

JIECANG Control Box JCB35R

Catalog excerpts

All Jiecang Linear Motion catalogs and technical brochures