JCB35K2-B Control box JCB35K2-B is a specially developed solution for patient lift. It provides care-takers with convenience for short distance transportation of patients. The complete system consists of a control box and a lithium battery enclosed in a single elegant module. The system is approved according to medical safety standards and contains a series of features ensuring a safe lift, e.g. the soft-start and emergency stop etc. General Features Output Voltage: Actuator Ports: Hand Control Port: Colour: Over-current Protection: Battery Status Display: Emergency Stop: Low Voltage Alarm: Protection Class: 1 channel Gray Yes, with LED indication Simultaneously displayed on the handset and on the control box Yes Buzzer alarm and indicator flashing IPX4 The battery status is shown in real-time with LED. The control box can be charged directly. Special Function • Three-segment LED display of the battery status on handset. Double prompt to low battery: indicator flashing + buzzer alarm • Low voltage alarm: Press the button, if it is detected that the battery voltage is lower than 21.5V, the buzzer will alarm. Release the button, the buzzer stops. • No need to remove the battery, the control box can be charged by charger directly. • Low power consumption: When without operation in 10S, the power indicator on the handset and the display on the control box will be off and the control box gets into the low power consumption state.

O JIECANGUsage Operating Temperature: Storage Temperature: Relative Humidity: Atmospheric Pressure:

O JIECANG External Charger

O JIECANGOrdering Key Take JCB35K2M35GK00084D4A0 as an example

Installation Battery installment steps Battery removal steps

Installing JCB35K2-A to the frame The control box can be installed on the patient lift or any other application according to the following steps. 1)Fix the mounting plate on the patient lift frame with M5*12 screws; 2)Insert the control box onto the mounting plate. It is recommended to install the control box vertically for easy viewing of the screen display.

Charging status The display shows the charging status The charger is not waterproof and washable, please use it in dry conditions.

Pull-out protection and Cable Management The control box JCB35K2-B uses Din connector, the cable can be inserted vertically upward. Emergency Stop 1)After pressing the emergency stop button under any situation, the power of the system will be cut off and the actions will be stopped. 2)According to the arrow on the button, turn clockwise the emergency stop button, the control box will be powered on and it can be operated normally.

O JIECANGStrictly abiding by medical safety certifications Passed EMC tests. To ensure our products pass all kinds of tests domestic or abroad. Communication protocol development Aiming at different applications, develop more extensive functions for control system. Professional customization Powerful R&D strength, fully satisfy customers’ needs. Development cycle is about 10 days, seizing more market opportunities Intelligent Control of Bluetooth Mobile phone as the remote, applying in home care. Market pioneer, Jiecang provides better choices Controllers adopt high-frequency wireless system....