Catalogs >
Jiangxi Liansheng Technology Co., Ltd. >
Optical Mirror Mount

Optical Mirror Mount
23Pages

Catalog excerpts

Jiangxi Liansheng Technology Co., Ltd Address: No 1015, Jinsha Third Road, Xiaolan Economic Development Zone, Nanchang, Jiangxi Province, PRC Tel: +86 791 8671 3680 Email: lynncheng@jxlskj.cn Website: www.jxlskj.cn Contact: Jerry Hu 1. M6x0.25 fine thread screw adjustment (matched with copper nut) 2. Reset with dish spring; reset force can be adjusted from zero to rigidity. 3. The lens cone mirror mount can be installed with optic, then fixed on the mirror mount. 4. Polytetrafluoroethylene shim to protect the optic. 5. 2-direction screw fixing holes, fit for different light path.

Open the catalog to page 1

Jiangxi Liansheng Technology Co., Ltd I Address: No 1015, Jinsha Third Road, Xiaolan Economic Development Zone, Nanchang, Jiangxi Province, PRC Tel: +86 791 8671 3680 Email: lynncheng@jxlskj.cn Website: www.ixlskj.cn Contact: Jerry Hu 1. M6x0.25 fine thread screw adjustment (matched with special copper nut) 2. Reset with dish spring; reset force can be adjusted from zero to rigidity. 3. Three polytetrafluoroethylene shims to protect the optic. 4. 2-direction screw mounting holes, fit for different light path. Technical Parameters:

Open the catalog to page 2

Jiangxi Liansheng Technology Co., Ltd Address: No 1015, Jinsha Third Road, Xiaolan Economic Development Zone, Nanchang, Jiangxi Province, PRC Tel: +86 791 8671 3680 Email: lynncheng@jxlskj.cn Website: www.jxlskj.cn Contact: Jerry Hu LSBFxx-lZT For smaller optics installation 1. M6X0.25 thread screw adjustment 2. Disco-shaped spring return Technical Parameters:

Open the catalog to page 3

LSKFxx-1ZT Features: 1. M6x0.25 fine thread screw adjustment (matched with special copper nut ), opening installation structure 2. Reset with dish spring; reset force can be adjusted from zero to rigidity. 3. Three polytetrafluoroethylene shims to protect the optic. 4. 2-direction screw mounting holes, fit for different light path.5. Adjustment range:±3° LSKF40-1ZT and LSKF50.8-1ZT have mounting hole

Open the catalog to page 4

1. M6x0.25 fine thread screw adjustment (partially matched with special copper nut) 2. High performance extension spring reset and the reset force is average, which can reduce stress. 3. three-point polytetrafluoroethylene holders to protect the optic. 4. 2-direction screw mounting holes, fit for different light paths. Technical Parameters:

Open the catalog to page 5

LSBF25.4-3ZT 1. M6X0.25 thread screw adjustment 2. Vertical direction adjustment 3. Axial vertical locking mechanism 25 LSBF-WJ Features: 1. M6X0.25 thread screw adjustment 2. Vertical direction adjustment 3. Axial vertical locking mechanism 4. Adjustment Range: ±3° 5. Standard threaded hole for objective lens WJ4/5"-1-36"

Open the catalog to page 6

1. M6X0.25 thread screw adjustment 2. Disco-shaed sring return 1. M6X0.25 thread screw adjustment 2. Disco-shaed sring return

Open the catalog to page 7

LSTF40-TZ-1YT Features: 1. M6X0.25 thread screw adjustment 2. Adjustment Range: Coarse: 360°, Fine: ±3° Installation Dia. LSTF50-TZ-1YT Features: 1. M6X0.25 thread screw adjustment 2. Adjustment Range: Coarse: 360°, Fine: ±3° Installation Dia.

Open the catalog to page 8

Technical Parameters:

Open the catalog to page 9

Technical Parameters:

Open the catalog to page 10

Technical Parameters:

Open the catalog to page 11

1.M52x1 standard screw thread hole in the center, can be used together with a variety of mirror mounts. 2.Thread clamping ring can fixed the polariscope. 3.Circumferential with 360 ° score, easy for reading. 1.M52x1 standard screw thread hole in the center, can be used together with a variety of mirror mounts. 2.Thread clamping ring can fixed the polariscope. 3.Circumferential with 360 ° score, easy for reading.

Open the catalog to page 12

1.Sliding plate can be adjustable till tight, which suitable for different thickness. 2.The design of sliding plate bottom is elastic device, which can move freely and stably. 3.Hand wheel locker can hold stability. Technical Parameters:

Open the catalog to page 13

LSLG3-5 1. Open structure, easy installation 2. Multiple filters can be installed 3. Specially designed for round filters Technical Parameters: Installation Thickness Diameter Changeable Mirror Mount LSBJ1-100-1ZT 1. For installation of cylinder mirror optics as well as lasers. 2. M6 positioning mounting holes Technical Parameters: Installation Dia. Weight

Open the catalog to page 14

LSBJ1-150-1ZT 1. For installation of cylinder mirror optics as well as lasers. 2. M6 positioning mounting holes Technical Parameters: Installation Dia. LSBJ2-xx 1. For installation of cylinder mirror optics as well as lasers. 2. M6 positioning mounting holes Technical Parameters:

Open the catalog to page 15

1. For installation of cylinder mirror optics as well as optics with different thickness. 2. Lockable mechanism and V shaped and rotary clamp Technical Parameters

Open the catalog to page 16

Beam Steering Mount LSZZ1-xx 1. To change the direction and height of the optical path 2. Mounting base with 360°rotation 3. M6X0.25 fine thread screw adjustment drive Technical Parameters: A(Installation dia.) Adjustment Height Tilting Angle

Open the catalog to page 17

LSZZ2-25 1. To change the direction and height of the optical path 2. Mounting base with 360°rotation 3. M6X0.25 fine thread screw adjustment drive Tilting Angle Adjustment Height Technical Parameters: Model LSZZ3-xx 1. To change the direction and height of the optical path 2. Mounting base with 360°rotation; Disco-shaped spring return. 3. M6X0.25 fine thread screw adjustment drive Technical Parameters: Model Adjustment Height Tilting Angle Weight

Open the catalog to page 18

Technical Parameters: Model Technical Parameters: Model

Open the catalog to page 19

Technical Parameters: Model Adjustable Plate Holders LSGB1-4 1. For hologram optical experiment to install plate 2. Elastic inlayer elastic unit for fixing rigid plate 3. Adopting spring in outlayer to clamp plate, easy to load and upload and suitable for darkroom operation 4. Adjustable plate thickness, highly common to use Hold Thickness Hold Width

Open the catalog to page 20

Technical Parameters:

Open the catalog to page 21

Adjustable Laser Mount LSJG1-60 1. The laser can make rotating and pitching adjustment 2. Forward and back three-jaw holder to firmly fix laser 3. Adjustable laser or cylinder's diameter 4. Adjustable length of laser or cylinder 5. M6*0.25 fine thread spindle, and high-quality butterfly-shaped spring resetting。 Technical Parameters: LSJG1 - 60 Adjustment Range

Open the catalog to page 22