Catalogs >
Jiangsu Union Logistics System Engineering Co.,Ltd >
Union Cantilever Rack CR19071201

Union Cantilever Rack CR19071201
1 / 6Pages

Catalog excerpts

Cantilever racking • mu 5±LSi'ai Cantilever racking is a type of racking that is used for storage of irregular or long items.This is achieved by eliminating obstructions in the front of racking and providing a clear opening in the front of the rack in lengths as long as desired. These rackings can also be decked for storage of items smaller than the spacing between towers. Tower spacing, upright capacity, and arm capacity are critical for a safe and proper system.This racking is available in roll formed and structural styles. It is widely used in mechanical manufacture and architecture material supermarket enterprises.

Open the catalog to page 1

Cantilever racking • L/v: / V Jiangsu Union Logistics System Engineering Co.,Ltd.

Open the catalog to page 2

L/YO/V Jiangsu Union Logistics System Engineering Co.,Ltd.

Open the catalog to page 3

Jiangsu Union Logistics System Engineering Co.,Ltd. Features: 1 > Designed for effective storage and handing of items such as lumber, pipes, bar stocks, timbers or other similar items 2, This rack can be divided into a single sided or double sided cantilever rack 3> Available with light, medium, and heavy carrying capacities

Open the catalog to page 4

1) Designed for effective storage and handing of items such as lumber, pipes, bar stocks, timbers or other similar items 2) Material: high quality steel 3) Surface: powder coated or galvanized and color optional 4) This rack can be divided into a single sided or double sided cantilever rack 5) Available with light, medium, and heavy carrying capacities 6) Design plan according to clients' requirements Cantilever rack is composed of upright post, cantilever arm and bracing. It is ideal for storing long and unwieldy items. Each kind of rack provides a wide range of flexibility and add-on...

Open the catalog to page 5

Component Specification Upright :the profile is 300*150mm which is made of 30# “I” shaped steel Arm: the profile is 120*64mm which is made of 12# “I” shaped steel Base: the profile is 280*140mm which is made of 28# “I” shaped steel Brace: the profile is 40*40mm which is made of 4# angle steel 3. Product Features: Starter unit:each starter unit consists of two uprights(include base and arms)which are connected together by horizontal and diagonal brace made from 40*40 angle steel, made from30# “I”steel with a front face width of 300mm and a depth of 150mm. Adder unit:each adder unit consists...

Open the catalog to page 6