GAS TO GAS PLATE HEAT EXCHANGER SELECTION DATA SHEET

1 / 4 PagesView full catalog

GAS TO GAS PLATE HEAT EXCHANGER SELECTION DATA SHEET

Product catalog summary

Plate Heat Exchanger Selection Data Sheet Summary

Company: Jiangsu RUIDING Environmental Engineering Co., Ltd.

Location: Jiangsu Yixing

Project Details:

Project Name: [Not Provided]
Project Number: [Not Provided]

Hot Side Specifications:

Design Condition (110% Load): Includes flow rate, inlet and outlet temperatures, and medium composition (N2, O2, H2O, CO2, CO, others).
Check Condition (100% Load): Similar parameters as design condition.
Medium Enthalpy: Provided at various temperatures (100℃ to 600℃).

Cold Side Specifications:

Design Condition (110% Load): Includes flow rate, inlet and outlet temperatures, and medium composition (N2, O2, H2O, CO2, CO, others).
Check Condition (100% Load): Similar parameters as design condition.
Medium Enthalpy: Provided at various temperatures (100℃ to 600℃).

Equipment Parameter Requirements:

Number of Passes: Hot and cold sides.
Heat Transfer Duty: Specified in kW.
Plate Material Requirement: [Not Provided]
Inlet and Outlet Sizes: For both hot and cold sides, specified in mm.
Allowable Pressure Drop: For both hot and cold sides, specified in Pa.
Maximum Allowable Dimensions: Length, width, and height specified in meters.

Catalog excerpts

GAS TO GAS PLATE HEAT EXCHANGER SELECTION DATA SHEET-1

Jiangsu RUIDING Environmental Engineering Co., Ltd. Plate Heat Exchanger Selection Data Sheet 单位名称：江苏瑞鼎环境工程有限公司 JIANGSU RUIDING ENVIRONMENTAL ENGINEERING

Open the catalog to page 1