*mydirectindustry

Catalogs
Jiangsu DINGS' Intelligent Control Technology
Ball Screw

Ball Screw

Product catalog summary

Company Overview
Jiangsu DINGS' Intelligent Control Technology Co., Ltd., established in 2008, specializes in precision linear motion products, including motors and motion controllers. The company operates globally with facilities in the USA, Korea, Japan, and Europe, and is listed on the Beijing Stock Exchange.

Product Warranty
Ball screws are covered by a 1-year warranty against material or workmanship defects under normal use. Exclusions apply for improper installation, unauthorized modifications, and force majeure events.

Certifications
DINGS' products comply with quality and environmental standards such as RoHS and REACH.

Technical Overview

Lead Accuracy: Defined by travel error deviation, with specific allowable errors for different accuracy grades (C3, C5, etc.).
Production Range: Ball screws range from Ø4 mm to Ø25 mm in diameter, with varying maximum lengths by accuracy grade.
Ball Screw Structure: Includes deflector, return tube, end deflector, and end cap types, each offering unique design benefits.
Material and Hardness: Utilizes materials like SUJ2 and S55C, with heat treatments for desired hardness.
Axial Clearance and Preload: Preload methods, such as oversized ball preload, enhance rigidity by eliminating axial clearance.
Rust Prevention and Lubrication: Proper lubrication is essential, with recommended greases and oils. Regular inspection and replenishment are advised.

Operating Instructions & Precautions
Products should remain in original packaging to prevent contamination. Disassembly is prohibited to maintain accuracy. Handling instructions emphasize careful handling to prevent injury and damage.

Ball Nut and Screw Handling Precautions

Ball Nut Removal: Avoid removing the ball nut from the shaft to prevent ball dropout.
Overtravel: Prevent excessive movement to avoid damage and wear.
Abnormal Operation: Stop immediately if abnormal noise, vibration, or motion occurs.
Ball Dropout: Cease operation if any ball or rolling element falls out.
Handling and Impact: Avoid dropping or impacting to prevent internal damage.

Operating Instructions & Precautions

Dust Protection: Use protective covers to prevent contamination.
Lubrication: Ensure proper lubrication before use and inspect every 2-3 months.
Allowable Speed and Load: Consult DINGS' for operating conditions to avoid exceeding limits.
Operating Temperature: Maximum temperature is 80°C; contact DINGS' for higher temperature applications.
Eccentric Load: Ensure proper alignment to avoid uneven load distribution.
Reciprocating Motion: Periodically operate over the full stroke range to mitigate wear.

Ball Screw Series Overview

Dimension Tables: Specifications for various models, including diameter, lead, and load ratings.
Part Number Construction: Coding system for identifying specifications, including series, diameter, lead, and accuracy grade.

Technical Specifications
Detailed specifications for mechanical components, including wrench flat width and depth, screw diameter, lead, nut dimensions, mounting hole sizes and pitches, and tapped hole details. Includes dynamic and static load ratings in Newtons (N).

Company Information
Headquarters in Jiangsu, China, with global manufacturing in Thailand and subsidiaries in the USA, Europe, and Korea. International offices in Shenzhen, China, and Japan.

Legal and Contact Information
Catalog issued in June 2026. Reproduction or distribution without consent is prohibited. Contact details for various offices and subsidiaries are provided.

Catalog excerpts

BALL SCREW PRODUCT CATALOG Jiangsu DINGS' Intelligent Control Technology Co., Ltd.

Open the catalog to page 1

Founded in 2008, Jiangsu DINGS’ Intelligent Control Technology Co., Ltd. is guided by the philosophy, “Quality stems from responsibility, and details determine success.” As a global leader in precision linear motion, DINGS’ delivers a comprehensive portfolio of precision stepper, DC and BLDC motors, voice coil motors, lead and ball screw linear actuators, PMSM motors for eco-mobility, and advanced motion controllers — setting new benchmarks in the global motion control market. 300+ Advanced Machining Equipment Automated Assembly Lines Company Founded & DINGS’ Brand Established BALL SCREW DINGS’...

Open the catalog to page 2

Precision Motion Specialist 1. Ball Screw Structure■ Deflector Type The deflector type uses a deflector or an integrated guide structure installed inside the nut to redirect the ball path and achieve recirculation. Compared with the return tube type, the nut outer diameter can be designed smaller. With a single-circuit design, it provides high load capacity and smooth operation. ■ Return Tube Type In the return tube type, the balls travel along the raceway between the screw shaft and the nut while carrying the axial load. They then move to an adjacent raceway through the return tube and re-enter...

Open the catalog to page 3

Precision Motion Specialist DINGS Precision Motion Specialist Jiangsu DINGS' Intelligent Control Technology Co., Ltd.

Open the catalog to page 4

Precision Motion Specialist Technical Overview DINGS Precision Motion Specialist Recommended Lubricants Jiangsu DINGS' Intelligent Control Technology Co., Ltd.

Open the catalog to page 5

Technical Overview 7. Support-side Shaft End Machining Type Operating Instructions & Precautions Instructions for Use During storage, keep the product in its original packaging. Do not open or damage the internal packaging, as this may allow foreign matter to enter or cause corrosion, resulting in degraded performance. ■ Operating Instructions 1. Do not disassemble the product. Disassembly may cause foreign matter intrusion, loss of accuracy, or accidents. 2. Do not attempt reassembly. Incorrect reassembly may damage the ball screw. Please return the product to DINGS' for paid repair and reassembly....

Open the catalog to page 6

Precision Motion Specialist Operating Instructions & Precautions DINGS Precision Motion Specialist ■ Dust Protection The ball screw can be used in contaminated environments if appropriate protection measures are applied. Install protective covers or equivalent measures to prevent foreign matter or chips from entering the ball screw. For information on improving contamination resistance in your operating environment, please contact the DINGS' sales team. Check the lubrication condition before use. Insufficient lubrication may cause the ball screw to lose functionality in a short time. Rust-preventive...

Open the catalog to page 7

Precision Motion Specialist DINGS Precision Motion Specialist Ball Screw Dimension Table Ball Screw Dimension Table Nominal Diameter 1. Effective stroke / screw length notation Example: 55R80 indicates an effective stroke of 55 mm and a total screw length of 80 mm. For rolled C7 ball screws, the shaft-end diameter must not exceed the root diameter of the screw. Notes For lengths exceeding the maximum production limit, please contact our sales engineers. Nominal Diameter 1. Effective stroke / screw length notation Example: 55R80 indicates an effective stroke of 55 mm and a total screw length of...

Open the catalog to page 8

Precision Motion Specialist DINGS Precision Motion Specialist [FBG • FBR] Flanged Single Nut - type 2 [FBG • FBR] Flanged Single Nut - type 2 Part Number Construction Example FBG 06 01 D X - 60 R 90 C3 Z - 001 © Thread Direction R = Right-hand Mechanical Dimension © Series FBG = Flanged single nut (ground) FBR = Flanged single nut (rolled) 01 = Standard ball lead, 1 mm 01K = Non-standard ball lead, 1 mm @ Ball Return Type D = Deflector Type © Total Screw Length (mm) Decimal point is indicated by "_" © Accuracy Grade C3 = JIS Standard C3 T = Return Tube type © Axial Clearance Z = Preload Decimal...

Open the catalog to page 9

Precision Motion Specialist DINGS Precision Motion Specialist Part Number Construction FBG = Flanged single nut (ground) FBR = Flanged single nut (rolled) 01 = Standard ball lead, 1 mm 01K = Non-standard ball lead, 1 mm © Ball Return Type D = Deflector Type T = Return Tube type © Custom Option (Non-standard) © Threaded Section Length (mm) Decimal point is indicated by "_" Mechanical Dimension © Thread Direction R = Right-hand © Total Screw Length (mm) Decimal point is indicated by "_" ® Accuracy Grade C3 = JIS Standard C3 © Axial Clearance Z = Preload © Custom Serial Number CBG = Cylindrical...

Open the catalog to page 10

Precision Motion Specialist DINGS Precision Motion Specialist [MBG • MBR] Metric Thread Single Nut [KBG • KBR] Square Single Nut Part Number Construction Mechanical Dimension MBG = Metric threaded single nut (ground) MBR = Metric threaded single nut (rolled) © Screw Diameter (mm) 01 = Standard ball lead, 1 mm 01K = Non-standard ball lead, 1 mm @ Ball Return Type D = Deflector Type T = Return Tube type © Custom Option (Non-standard) © Threaded Section Length (mm) Decimal point is indicated by "_" © Thread Direction R = Right-hand © Total Screw Length (mm) Decimal point is indicated by "_ © Accuracy...

Open the catalog to page 11

HEADQUARTERS Jiangsu DINGS’ Intelligent Control Technology Co., Ltd. No. 2850 Luheng Road, Changzhou Economic Development Zone, Jiangsu Province, China Tel : +86-519-85177826 E-mail : [email protected] www.dingsmotion.com GLOBAL MANUFACTURING LOCATION DINGS’ Intelligent Control Technology (Thailand) Co., Ltd. 42/29 Moo 4, Uthai Subdistrict, Uthai District, Phra Nakhon Si Ayutthaya 13210, Thailand Tel SUBSIDIARIES DINGS’ Motion USA DINGS’ Motion Europe 355 Cochrane Circle Morgan Hill, CA 95037 4 Avenue du Grand Trémoutier 44120 Vertou, France C-702, 158 Haneulmaeul-ro, Ilsandong-gu, Goyang-si,...

Open the catalog to page 12

Ball Screw

Ball Screw

Catalog excerpts

All Jiangsu DINGS' Intelligent Control Technology catalogs and technical brochures