I ECl ow-Vol t ageI nduct i onMot or s

High/medium voltage motor (frame size 355 - 1000) Direct current D.C motor (frame size 160 - 900) Synchronous motor Asynchronous 3PH Motor (frame size 71 - 450) Flame Proof / Explosion Proof High Voltage / Low Voltage Motor (HV/LV Motor) CERTIFICATIONS ISO9001, IS014000, IS018000 CE , CC/CSA, CCC UL, SA, TUV , ATEX * Globalisation ’ High Efficiencies ' Energy Saving

Products Introduction / Identification 1 Products Specifications / Parameters 1 Motor's Enclosure / Protection Protection Device Paint / Finishing Terminal Box and Cable Entry Vibration Voltage/ Frequencies Duty Cycles Performance Data for IE3 Series 6 Dimensional Drawing for IE3 Series 10 Performance Data for IE4 Series 15 Dimensional Drawing for IE4 Series 19 Performance Data for IE5 Series 23 Dimensional Drawing for IE5 Series 27 Two Speeed motor General Data 31 Inverter Duty Motors - DZEV Series 32 Performance and Characteristics Bearings Motor's Frame, Rated Power(KW) and Sound Level (dB)...

DZ series of motors are standard TEFC (Totally Enclosed Fan Cooled ) three phase asynchronous motor, designed and manufactured to meet all kinds of environmental conditions. Such as mining, petroleum, marine/offshore and any general tropical working areas. Combined with high quality materials and stringent manufacturing inspections, DZ range of motors offer excellency in efficiency, starting torque, low noise and energy saving. Type Motor Frame Size KW Range Voltage Charecteristic & Features IE3 High Efficiency 80_355 0.75-315KW Motor Efficiency Conforms to I EC 60034-30 IE3 Level High Efficiency...

- DZ Motor's dimensional and rated output data generally confirm to IEC 60034 and DIN42673 - All DZ Motors meet the requirement for ‘CE’ Markings - Cooling method are as per IC411 specification - The Standard level of enclosure protection for both motor and terminal box are IP55 and IP56. IP65 and IP66 are available upon requests - The 1st number figure after IP is the degree of protection against contact and ingress of solid foreign bodies, protection against live or moving parts 5 = Dust protected. Ingress of dust is not totally prevented, but does not enter in sufficient amount to interfere...

Motor Framd Terminal Box & Cable Entry- Standard terminal box is mounted on the Top. Motors are also available with on the right hand side view from the drive end or Left hand side terminal box Frame Size - Removed Terminal Box ( The terminal box will replace by a blanking plate . Extend wire, include earth connector) Frame

The motors are dynamically balanced in accordance with vibration severity grade "N" normal balance IEC 60034-14. The low vibration version "R" (reduced) or vibration severity grade "S " (special) can be supplied where high demands are made on quiet running. Care must be taken to ensure that transmission parts (pulleys, couplings) supplied by others are dynamically balanced with hall eather key. Vibration limits are according to IEC 60034-14

The performance data are based at standard ambient conditions of 40°C at 1000 meter above sea level. For any conditions differ from this standard, please contact DZ for the parameter factoring For Single Speed Motor at and below 3.0KW, the standard connections are 230V Delta / 400V Star. Depending on the winding voltage at star connection. For Single Speed Motor at and above 4.0KW, the standard connections are 400V Delta / 690V Star. Depending on the winding voltage at delta connection. Single Speed Motor Multi-Speed Motor With 2 Separate Winding Multi-Speed Motor in Dahlander connection (Tapped...

Motor Frame Size Flange Mounting Foot Mounting Horizontal Foot Mounting Vertical

Performace Data 400V/3Ph/50HzClass F, IP55 Class B Temperature Rise Current Frame Speed Full load KW Size (RPM) (A) Full Locked Load Rotor ( Nm) Tst/TN Noise Level Break Moment Down of inertia Tmax/T J=1/4GD2 N (kg m2) * Data are for reference only

Effici Power encv Factor Noise Level Motor Locked Frame Speed Full load Rotor KW Size (RPM) (A) Ist/IN Break Moment Full Locked Down of inertia Load Rotor Tmax/T J=V4GD? LwdB(A) (Nm) Tst/TN N (kg m: Data are for reference only

Performace Data 400V/3Ph/50HzClass F, IP55 Class B Temperature Rise Current Effici Power ency Factor Noise Level Motor Locked Frame Speed Full load Rotor Size (RPM) (A) Ist/IN Break Moment Full Locked Down of inertia Load Rotor Tmax/T J=1/4GD2 LwdB(A) (Nm) Tst/TN N (kg m2) Data are for reference only

Class F, IP55 Class B Temperature Rise Effici Power Current__ency Factor _Torque_ Break Moment Motor Locked Full Locked Down of inertia Frame Speed Full load Rotor Load Rotor Tmax/T J=1/4GD2 KW Size (RPM) (A) Ist/IN 100 100 (Nm) Tst/TN N (kg m2) Noise Level * Data are for reference only

Frame Poles DEFGMNP S

Mounting Dimension Overall Dimension

Mounting Dimension Overall Dimension

Effici Power Current__ency Factor _Torque Noise Level Motor Locked Full Locked Frame Speed Full load Rotor Load Rotor KW Size (RPM) (A) Ist/IN 100 100 (Nm) Tst/TN * Data are for reference only

Noise Level Effioi Power Current__encv Factor _Torque Break Moment Motor Locked Full Locked Down of inertia Frame Speed Full load Rotor Load Rotor Tmax/T J=1/4GD2 LwdB(A) * Data are for reference onlv

Noise Level Effioi Power Current__encv Factor _Torque Break Moment Motor Locked Full Locked Down of inertia Frame Speed Full load Rotor Load Rotor Tmax/T J=1/4GD2 LwdB(A) * Data are for reference onlv

Performace Data 400V/3Ph/50HzClass F, IP55 Class B Temperature Rise Current Effici Power ency Factor _Torque Noise Level Frame Speed Full load KW Size (RPM) (A) Break Moment Full Locked Down of inertia Load Rotor Tmax/T J=1/4GD2 LwdB(A) 100 100 (N m) Tst/TN N (kg m2) * Data are for reference only

Class F, IP55 Class B Temperature Rise Motor Locked Frame Speed Full load Rotor KW Size ( RPM) (A) lst/1 N 100 Noise Level Break Moment Down of inertia Tmax/T J=1/4GD2 N (kg m2) * Data are for reference onlv

Performace Data 400V/3Ph/50Hz Class F, IP55 Class B Temperature Rise Effici Power Current__ency Factor Frame Speed KW Size (RPM) * Data are for reference only Locked Full load Rotor Noise Level