video corpo

ATEX Cert.YBX3 80-355

ATEX Cert.YBX3  80-355
1 / 38 PagesView full catalog

ATEX Cert.YBX3 80-355

Product catalog summary
EU Type Examination Certificate Overview
This document is an EU Type Examination Certificate issued by LCIE for a three-phase asynchronous motor intended for use in potentially explosive atmospheres. It confirms compliance with Directive 2014/34/EU and outlines the essential health and safety requirements met by the product.
Product Description
The YBX3 motor is a three-phase asynchronous motor with a flameproof design, constructed from grey cast iron. It includes a cooling system compliant with IC411 standards and can be equipped with anti-condensation heaters and PTC thermal detectors for temperature control.
Range Details
The motor range includes various models with different numbers of poles (2, 4, 6, 8), stator lengths, frame sizes, and shaft heights. Specific dimensions are provided for each type.
Ratings
The motors operate at rated voltages ranging from 220V to 1140V and frequencies of 50Hz or 60Hz. Derating factors apply for ambient temperatures above 40°C and altitudes over 1000m.
Marking and Warnings
Product marking includes manufacturer details, type, serial number, and specific warnings such as not opening the motor when energized or in explosive atmospheres. Additional warnings apply for motors driven by converters and those used in high-temperature environments.
Specific Conditions of Use
Repairs to flameproof joints should be conducted by the manufacturer. Additional conditions apply for motors with specific features like space heaters and PTC thermistors.
Specifications and Procedures
  • Flameproof Joint Repairs: Must adhere to manufacturer’s drawings.
  • Anti-Condensate Heaters: Maximum power is 110W and should only operate when motors are not powered.
  • Temperature Control: Motors with frequency converters have PTC sensors to limit stator temperature to 120°C for T4 class.
  • Cable Requirements: Motors in ambient temperatures >50°C require cables with thermal stability >95°C.
  • Permanent Cable Connections: Must be protected against mechanical stress and comply with EN 60079-0 standards.
  • ATEX Certified Cable Glands: Required for flying leads.
  • Marine Applications: Group IIC motors should be cleaned with a wet rag if paint thickness exceeds 0.2mm.
  • Fasteners: Must have a minimum property class of 8.8 with specific tensile and yield strengths.
Essential Health and Safety Requirements
Compliance is ensured by adherence to standards EN IEC 60079-0:2018 and EN 60079-1:2014.
Descriptive Documents
Technical files and instruction manuals are listed with specific references and revision dates.
Routine Tests
Each equipment must undergo a static overpressure test as per EN 60079-1.
Certification Conditions
EU type examination certificate holders must comply with production control requirements of Directive 2014/34/EU.
Certificate Changes
Material changes and normative updates according to EN IEC 60079-0:2018.
See more

Catalog excerpts

ATEX Cert.YBX3  80-355-1

ATTESTATION D’EXAMEN UE DE TYPE EU TYPE EXAMINATION CERTIFICATE Directive 2014/34/UE Appareil ou Système de Protection destiné à être utilisé en 2 Atmosphères Explosibles Directive 2014/34/EU Equipment or Protective System Intended for use in Potentially Explosive Atmospheres 3 Produit : Moteur asynchrone triphasé Product : Three-Phase Asynchronous Motor Type: YBX3-100 **-*, YBX3-90 **-* et / and YBX3-80 **-* Manufacturer : Jiangsu Dazhong Electric Motor Co., Ltd Address : No 66-68, Dazhong Road, Jingjiang City, Jiangsu Province, China 6 Ce produit et ses variantes éventuelles acceptées sont décrits dans I'annexe de la présente attestation et dans les documents descriptifs cités en référence. This product and any acceptable variations thereto are specified in the schedule to this certificate and the documents therein referred to. 7 Le LCIE, Organisme Notifié sous la référence 0081 conformément à l’article 17 de la directive 2014/34/UE du Parlement européen et du Conseil du 26 février 2014, certifie que ce produit est conforme aux Exigences Essentielles de Sécurité et de Santé pour la conception et la construction de produits destinés à être utilisés en atmosphères explosibles, données dans l’annexe II de la Directive. Accréditation Cofrac Certification de Produits et Services, n°50014. Portée disponible sur www.cofrac.fr. LCIE, Notified Body number 0081 in accordance with article 17 of the Directive 2014/34/EU of the European Parliament and the Council of 26 February 2014 certifies that product has been found to comply with the Essential Health and Safety Requirements relating to the design and construction of products intended for use in potentially explosive atmospheres, given in Annex II to the Directive. Cofrac Accreditation Product and Services Certification n°50014. Scope available on www.cofrac.fr. Les résultats des vérifications et essais figurent dans le(s) The examination and test results are recorded in confidential rapport(s) confidentiel(s) N° : report(s) N°: 147729-701151-02 ; 170181-759450-12 8 Le respect des Exigences Essentielles de Sécurité et de Santé est assuré par la conformité à : Compliance with the Essential Health and Safety Requirements has been assured by compliance with : EN IEC 60079-0:2018 EN 60079-1:2014 9 Le signe « X » lorsqu'il est placé à la suite du numéro de l’attestation, indique que cet appareil est soumis aux conditions particulières d’utilisation, mentionnées dans l’annexe de cette attestation. If the sign “X” is placed after the certificate number, it indicates that the product is subject to the Specific Conditions of Use specified in the schedule to this certificate. 10 Cette Attestation d'Examen UE de Type concerne uniquement la conception et la construction du produit spécifié. Des exigences supplémentaires de la directive sont applicables pour la fabrication et la fourniture du produit. Ces dernières ne sont pas couvertes par la présente attestation. This EU Type Examination Certificate relates only to the design and construction of the specified product. Further requirements of the Directive apply to the manufacturing process and supply of this product. These are not covered by this certificate. 11 Le marquage du produit est mentionné dans l’annexe de cette attestation. The marking of the product is specified in the schedule to this certificate. Responsable de Certification Certification Officer Julien Gauthier Seul le texte en français peut engager la responsabilité du LCIE. Ce document ne peut être reproduit que dans son intégralité, sans aucune modification. Il est établi en accord avec le référentiel de certification ATEX du LCIE. The LCIE’s liability applies only on the French text. This document may only be reproduced in its entirety and without any change. It is issued in acc

 Open the catalog to page 1
ATEX Cert.YBX3  80-355-2

ATTESTATION D’EXAMEN UE DE TYPE - ANNEXE EU TYPE EXAMINATION CERTIFICATE - SCHEDULE 1 Version : 01 Le moteur type YBX3 est un moteur asynchrone triphasé. Il est constitué d’une carcasse et d’une boite de raccordement. La carcasse et la boite de raccordement sont protégées par le mode de protection « Ex db » (antidéflagrant). L’ensemble est construit en fonte grise de qualité minimum 250. Des traversées antidéflagrantes sont utilisées entre la carcasse et la boîte à bornes. Type YBX3 motor is three-phase asynchronous motor. It comprises a main enclosure and a terminal box. The protection type...

 Open the catalog to page 2
ATEX Cert.YBX3  80-355-3

ATTESTATION D’EXAMEN UE DE TYPE - ANNEXEEU TYPE EXAMINATION CERTIFICATE - SCHEDULE 1 Version : 01 LCIE 20 ATEX 3011 X Issue : 01 DETAIL DE LA GAMME RANGE DETAILS Nombre de poles / Number of poles Longueur du stator / Code Type YBX3-100L-2 Type YBX3-100L1 -4 Type YBX3-100L2-4 Type YBX3-100L-6 Type YBX3-100L1 -8 Type YBX3-100L2-8 Type YBX3-90S-2 Type YBX3-90L-2 Type YBX3-90S-4 Type YBX3-90L-4 Type YBX3-90S-6 Type YBX3-90L-6 Type YBX3-90S-8 Type YBX3-90L-8 Type YBX3-80M1-2 Type YBX3-80M2-2 Type YBX3-80M1-4 Type YBX3-80M2-4 Type YBX3-80M1-6 Type YBX3-80M2-6 Type YBX3-80M1-8 Type YBX3-80M2-8 Hauteur...

 Open the catalog to page 3
ATEX Cert.YBX3  80-355-4

ATTESTATION D’EXAMEN UE DE TYPE - ANNEXEEU TYPE EXAMINATION CERTIFICATE - SCHEDULELCIE 20 ATEX 3011 X Issue : 01 Taille de la Frame Size La puissance nominale du moteur peut etre declassee selon les instructions du fabricant et comme suit, lorsque : - La temperature ambiante maximum est entre +40°C et +60°C. (les moteurs sont congus a l'origine pour 400 VAC, 50 Hz) : _ originally designed for 400 VAC, 50 Hz): MARQUAGE Le marquage du produit doit comprendre : Jiangsu Dazhong Electric Motor Co., Ltd Adresse : ... MARKING The marking of the product shall include the following : Jiangsu Dazhong Electric...

 Open the catalog to page 4

All Jiangsu Dazhong Electric Motor CO., Ltd catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.