*mydirectindustry

Catalogs
Jewell Instruments
Tuff Tilt 420 Datasheet

Tuff Tilt 420 Datasheet

Product catalog summary

Overview: The Model C801 "Tuff Tilt 420" Tiltmeter by Jewell Instruments is designed for precision and durability, offering a 4-20mA output. It is available in uniaxial and biaxial configurations and is suitable for structural monitoring, industrial measurement, and control systems, especially where long cable runs are necessary.

Specifications:

Angular Range: High-Gain: ±0.5°, Standard: ±3.0°, Wide-Angle: ±50°
Resolution: High-Gain: <0.0001°, Standard: 0.0006°, Wide-Angle: 0.01°
Repeatability: High-Gain: <0.0002°, Standard: 0.001°, Wide-Angle: 0.02°
Non-Linearity: High-Gain: 1%, Standard: 2%, Wide-Angle: 0.5%
Scale Factor: High-Gain: 0.0625°/mA, Standard: 0.375°/mA, Wide-Angle: 6.25°/mA
Temperature Coefficients: Kz: ±0.0002°/°C (typical), Ks: <0.04%/°C (typical)
Time Constant: 0.15 sec
Output: 4-20mA two-wire current loop per axis
Load Impedance: 270 ohms
Temperature Output: 0.1°C/mV typical
Power: (0.02 Ampere x R + 10 VDC) < Vs < 29 VDC
Environmental: Operating and storage temperature: -40 to +85°C, IP65 rated
Dimensions: 120 x 80 x 60 mm, 0.5 kg
Materials: Diecast painted aluminum
Cable: 3m, 5-conductor with PVC jacket

Accessories:

Mounting bracket for vertical surfaces (Part No. 81439)
Mounting plate for horizontal surfaces (Part No. 84051)
6-conductor cable (Part No. 70369)
Optional 6-pin male receptacle (Part No. 62204)
Optional 6-socket in-line plug (Part No. 62202)

Wiring Diagram:

Uniaxial Versions: Loop Power (V+): Red, Loop Return (GND): Black, Temp. Excitation: Blue, Temp. Out: Yellow, Temp. Return: White, Drain: Bare (Clear)
Biaxial Versions: Loop Power (V+): Red (X), Green (Y), Loop Return (GND): Black (X), White (Y), Temp. Excitation: Blue, Temp. Out: Yellow, Drain: Bare (Clear)

Catalog excerpts

Jewell Instruments The model C801 "Tuff Tilt 420" delivers the same precision and durability of our A801, but with 4-20mA output. Units are available in single axis (uniaxial), and dual axis (biaxial) tilt configurations. The Tuff Tilt 420 is current loop powered, so tilt measurements are made using an economical 2-wire pair, and because output is 4-20mA there is no signal loss over long cables. Units also include an on-board thermistor for temperature measurements. All units are rated IP65 waterproof for advanced protection from the elements. Use the C801 for structural monitoring, 4-20mA PLC systems, industrial measurement and control, or anywhere long cable runs are necessary. Specifications subject to change without notice on account of continued product development Ordering Code: Accessories: Part No. C801 || L: Longitudinal I— T; Transverse B: Biaxial H: High Gain {±0.5°) ~ S: Standard Gain [±3°] W: Wide Angle (±50°1 Jewell Instruments LLC 850 Perimeter Road, Manchester, NH 03103 [email protected] • www.jewellinstruments.com • Tel (800) 227-5955 L00

Open the catalog to page 1

Model C801 “Tuff Tilt 420” Tiltmeter Dimensions: (X-AXIS) Jewell Instruments LLC 850 Perimeter Road, Manchester, NH 03103 [email protected] • www.jewellinstruments.com • Tel (800) 227-5955 L00255 R

Open the catalog to page 2

Jewell Instruments Wiring Diagram: Function Jewell Instruments LLC 850 Perimeter Road, Manchester, NH 03103 [email protected] • www.jewellinstruments.com • Tel (800) 227-5955 L00255 Rev. C

Open the catalog to page 3

All Jewell Instruments catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list