*mydirectindustry

RMIW-L Series

Product catalog summary

Overview: The Jewell Emerald Series inclinometer is a high-precision, low-cost device designed for applications requiring accurate motion sensing. It is suitable for use in robotics, construction equipment, industrial measurement and control, and precision machining.

Key Features:

Mounts horizontally or vertically, compatible with AccuStar footprint.
Extremely rugged and cost-effective compared to traditional force-balanced inclinometers.
High accuracy and greater precision than MEMS technologies.
Withstands up to 500g shock.
Offers ±5 V DC output and single-ended power input.

Applications: The inclinometer is used in wheel alignment, construction equipment, antenna positioning, robotics, cross rail management, tilt safety systems, industrial and machining equipment, and stadium loudspeaker positioning.

Performance Specifications:

Input ranges from ±3° to ±90° with a full range output of 4 to 20 mA.
Nonlinearity ranges from 0.02% to 0.05% FRO maximum.
Scale factor temperature sensitivity is 100 PPM/°C maximum.
Bandwidth is nominally 5.0 Hz.
Output axis misalignment is up to 0.50° maximum.
Operating temperature range is -55°C to +85°C, with a storage range of -60°C to +90°C.

Electrical and Environmental Specifications:

Single-axis with IP65 seal.
Input voltage range is +12 to +28 VDC, with a maximum input current of 55 mA.
Output impedance is nominally 10 Ohms, with a maximum noise of 0.006 Vrms.
Custom capabilities include alternative input options, pigtail and connector options, and custom ranges and bandwidths.

Ordering Information: The product can be ordered with different range options from ±3° to ±90° and mount options including floor, wall vertical, and wall horizontal mounts.

Catalog excerpts

RMIW-L Series 4-20mA Output Making Sense out of Motion… Input Ranges From ±3° to ±90° Rugged, High Precision, Low Cost, Dual-Ended Power Input Inclinometer The Jewell Emerald Series inclinometer is a low cost, high precision inclinometer designed with higher accuracy than comparable MEMS devices. Applications include robotics, construction equipment, industrial measurement and control, and precision machining. Outline Diagram Features • Mounts horizontally or vertically to match the AccuStar footprint • Extremely Rugged • Lower Cost than traditional Force Balanced Inclinometers • High Accuracy • Greater Precision than MEMS Technologies • Withstands up to 500g shock • ±5 V DC Output • Single-Ended Power Input Dimensions in inches [mm] Wheel Alignment Construction Equipment Antenna Positioning Robotics Cross Rail Management Tilt Safety Systems Industrial and Machining Equipment Stadium Loudspeaker Positioning Wire Description Wiring Code Jewell Instruments LLC, 850 Perimeter Road, Manchester, NH 03103 [email protected] • www.jewellinstr

Open the catalog to page 1

RMIW-L Series 4-20mA Output Making Sense out of Motion… Performance Specifications STATIC/DYNAMIC Input Range, °: Full Range Output (mA): Nonlinearity (Note 2) % FRO maximum: Scale Factor, Volts/g, nominal: Scale Factor Temp. Sensitivity (SFTS), PPM /°C maximum: Bandwidth (-3 dB), Hz nominal: Output Axis Misalignment, ° maximum: Pendulous Axis Misalignment, ° maximum: 0° Output, Volts range (mA): 0° Output Temp. Sensitivity, Volts /°C maximum: Resolution and Threshold (Note 3), µradians maximum: Weight (oz.): Number of Axes: Input Voltage Range, (VDC): Input Current, mA, max: Output Impedance,...

Open the catalog to page 2

RMIW-L Series

RMIW-L Series

Catalog excerpts

All Jewell Instruments catalogs and technical brochures