*mydirectindustry

Catalogs
Jewell Instruments
RMIW-L 4-20mA Output Datasheet

RMIW-L 4-20mA Output Datasheet

Product catalog summary

Overview: The Jewell Emerald Series inclinometer is a high-precision, low-cost device designed for applications requiring accurate motion sensing. It offers superior accuracy compared to MEMS devices and is suitable for use in robotics, construction equipment, industrial measurement, and precision machining.

Key Features:

Mounts horizontally or vertically, compatible with AccuStar footprint.
Extremely rugged and cost-effective compared to traditional force-balanced inclinometers.
High accuracy and precision, withstanding up to 500g shock.
Offers a ±5 V DC output and single-ended power input.

Applications: The inclinometer is used in wheel alignment, construction equipment, antenna positioning, robotics, cross rail management, tilt safety systems, industrial and machining equipment, and stadium loudspeaker positioning.

Performance Specifications:

Input ranges from ±3° to ±90° with a full range output of 4 to 20 mA.
Nonlinearity ranges from 0.02% to 0.05% FRO maximum.
Scale factor temperature sensitivity is 100 PPM/°C maximum.
Bandwidth is nominally 5.0 Hz.
Output axis misalignment is up to 0.50° maximum.
Resolution and threshold are 3.5 µradians maximum.

Electrical and Environmental Specifications:

Operates on a single axis with an IP65 sealed enclosure.
Input voltage range is +12 to +28 VDC, with a maximum input current of 55 mA.
Operating temperature range is -55°C to +85°C, and storage temperature range is -60°C to +90°C.
Shock resistance is 500g, 1 msec, ½ sine.

Ordering Information: The inclinometer is available in various range options from ±3° to ±90° and mount options including floor, wall vertical, and wall horizontal mounts.

Catalog excerpts

Making Sense out of Motion... Input Ranges From ±3° to ±90° Rugged, High Precision, Low Cost, Dual-Ended Power Input Inclinometer The Jewell Emerald Series inclinometer is a low cost, high precision inclinometer designed with higher accuracy than comparable MEMS devices. Applications include robotics, construction equipment, industrial measurement and control, and precision machining. Features • Mounts horizontally or vertically to match the AccuStar footprint • Extremely Rugged • Lower Cost than traditional Force Balanced Inclinometers • High Accuracy • Greater Precision than MEMS Technologies • Withstands up to 500g shock • ±5 V DC Output • Single-Ended Power Input Applications • Wheel Alignment • Construction Equipment • Antenna Positioning • Robotics • Cross Rail Management • Tilt Safety Systems • Industrial and Machining Equipment • Stadium Loudspeaker Positioning HORIZONTAL MOUNT VERTICAL MOUNT FLOOR MOUNT Jewell Instruments LLC, 850 Perimeter Road, Manchester, NH 03104 [email protected] • www.jewellinstruments.com • Tel (800) 227-5955 Rev. D

Open the catalog to page 1

Making Sense out of Motion... Performance Specifications STATIC/DYNAMIC Input Range, °: ±3 ±14.5 ±30 ±45 ±60 ±90 Full Range Output (mA): 4 to 20 4 to 20 4 to 20 4 to 20 4 to 20 4 to 20 Nonlinearity (Note 2) % FRO maximum: 0.05 0.02 0.02 0.02 0.04 0.05 Scale Factor, Volts/g, nominal: 152.9 32.0 16.0 11.3 9.2 8 Scale Factor Temp. Sensitivity (SFTS), PPM /°C maximum: 100 100 100 100 100 100 Output Axis Misalignment, ° maximum: 0.25 0.50 0.50 0.50 0.50 0.50 Pendulous Axis Misalignment, ° maximum:...

Open the catalog to page 2

RMIW-L 4-20mA Output Datasheet

RMIW-L 4-20mA Output Datasheet

Catalog excerpts

All Jewell Instruments catalogs and technical brochures