video corpo

Miniature Tilt Sensor Selector Guide
1Pages

{{requestButtons}}

Catalog excerpts

Miniature Tilt Sensor Selector Guide - 1

Features & Benefits Performance Specs 755-Series & 756-Series High-Gain & Mid-Range Sensors • Single or dual-axis • Vertical or horizontal mounting • Same sensors used in the 500 & 700-Series tiltmeters • Vacuum-compatible versions available X-ray mirrorstelescope mounts Wind tunnel models Medical devices Tilt Sensors 84053 59577 Mid-Range Ceramic Mid-Range Ceramic Sensor Sensor Assembly (Without Mounting Bracket) • Fast warm-up, high sensitivity, high repeatability & excellent long-term stability • Anodized aluminum bracket to strengthen the assembly & simplify installation & repositioning Leveling and positioning for test and measurement Signal Conditioners 84064-02 Wide-Angle Ceramic Sensor Assembly 59579-02 Wide-Angle Ceramic Sensor (Without Mounting Bracket) 84828 Basic Signal Conditioner IRIS Digital Signal Conditioning Card 781 Signal Conditioning Unit (Bench Top) • Fast warm-up & excellent thermal, mechanical & long-term stability • Anodized aluminum bracket for strength & easy installation Leveling and positioning for test and measurement Available Channels Operating Temperature Range • Slim, low-profile design for small spaces • Single-ended voltage output • Circuit is reverse polarity protected Wide input voltage range, reverse polarity protection & transient surge protection 2-pole Butterworth low-pass filter can be tuned to special requirements Drives analog voltage output signals over cable lengths longer than 300m Amplifier for an LM35 temperature sensor Will drive cable lengths over 1000m Single-level transient surge protection included Small size, easy setup & fast response time Current loop powered for long cable length Operate with normal or reverse polarity • 16-bit A/D converter • 540K of onboard FLASH memory • Real-time clock • Measures temperature • RS232 or RS422 output Digital data streams or onboard recording of tilt measurement • Rugged aluminum case • Drives tilt & temperature signals over 1000m cable lengths • Switches for control gain and low-pass filter settings, and power on-off • Laboratory & factory testing/measurement Features & Benefits Performance Specs Electrical Environmental NOTE: Specifications are subject to change without notice. For complete specifications, sensor capabilities and ordering information, please visit www.jewellinstruments.com 1 - Custom Ranges also available on request 2 - Non-linearity represents maximum deviation from linear regression line, typical; <0.05% linearity or better achievable using a 5th order polynomial 3 - Ks = % chan

Open the catalog to page 1

All Jewell Instruments catalogs and technical brochures

  1. JDI-100/200

    9 Pages

  2. QFA-180

    2 Pages

  3. LCF-2000

    2 Pages

  4. QFA-125

    2 Pages

  5. LSB Series

    2 Pages

  6. LSMP Series

    2 Pages

  7. ASB Series

    2 Pages

  8. C4 C-Frame

    2 Pages

  9. C2 C-Frame

    2 Pages

  10. • RMIW-S

    2 Pages

  11. LCI Series

    2 Pages

  12. QFM-180

    2 Pages

  13. ASMP Series

    2 Pages