LSOC/P Series 4-20 mA Output Flexure Suspension Servo Fluid Damped Inclinometer

Product catalog summary

Overview
The Jewell LSOC/LSOP "L" Series Inclinometer is a high-performance device designed for environments with high shock, vibration, and electrical noise. It is suitable for applications requiring long cable runs.

Key Features

High resolution and low hysteresis of less than 0.0005% of full range output.
Robust design capable of withstanding shocks over 1500g and vibrations greater than 35grms.
Responsive to slope changes as small as 0.000006"/ft.
Utilizes high accuracy closed-loop force balanced sensor technology.
Low white noise spectral density better than 0.15µV/Sq Root HZ.

Applications

Steel processing: continuous casting, electric arc furnace, and idle control.
Heavy construction: paving, grading, mining, tunneling, and overturn detection.
Structural monitoring: dams, support columns, bridges, etc.
Railway: automated train controls, rail leveling, and rail bed analysis.
Military: measuring angular tilt in high shock and vibration environments.

Performance Specifications

Input Range: ±1.0° to ±90.0°.
Full Range Output: 4 to 20 mA.
Non-Linearity: Max 0.05% to 0.10% FRO.
Scale Factor: 458 to 8.0 Ma/G.
Natural Frequency: 0.3 to 30 Hz.
Operating Temperature Range: -18 to +71°C.
Survival Temperature Range: -40 to +71°C.
Shock Resistance: 1500g, 0.5 msec, ½ sine.

Custom Capabilities

Internal temperature sensor and thermal modeling for accuracy.
Compact LSR Series package available.
Factory set zero biasing for non-horizontal measurements.
Custom input ranges and output impedances available.

Ordering Information
Specify model type with range and "L" for 4 to 20 mA current. Example: LSOC-14.5L for connector and ±14.5° range, LSOP-14.5L for solder pins and ±14.5° range.

Catalog excerpts

LSOC/P Series 4-20 mA Output Flexure Suspension Servo Fluid Damped Inclinometer-1

LSOC/LSOP "L" Series Inclinometer Making Sense out of Motion.. The Jewell LSOC/LSOP "L" Series 4-20 mA Output Flexure Suspension Servo Fluid Damped Inclinometer is designed for applications where high levels of shock, vibration and electrical noise are present and/or long cable Outline Diagram • Extremely high resolution and low hysteresis of less than 0.0005% of full range output. • Extremely robust designed to with- stand shocks in excess of 1500g and vibration greater than 35grms. • Responds to changes of slope as • High accuracy closed-loop force balanced sensor technology. • Low white noise spectral density of better than 0.15uV/Sq Root HZ • Steel processing: continous casting, electric arc furnance and idle control • Heavy construction: paving, grading, mining, tunneling, and overturn detection • Structrural monitoring: walls of dams, support, columns, bridges, and others • Railway: automated train controls, rail leveling and grinding, and rail bed analysis • Military Applications: Measuring of angular tilt where high levels of shock Pin Out (Options C-connector, P-pin) Jewell Instruments LLC, 850 Perimeter Road, Manchester, NH 03103

Open the catalog to page 1

LSOC/P Series 4-20 mA Output Flexure Suspension Servo Fluid Damped Inclinometer-2

LSOC/LSOP "L" Series Inclinometer Making Sense out of Motion… Performance Specifications STATIC/DYNAMIC Input Range (°) (Note 1) Full Range Output (FRO), mADC ± 1.0% Scale Factor, Ma/G (Nominal) Scale Factor Temp Sens (PPM/°C, Max.) Natural Frequency, Hz (Nominal) (Note 3) Bandwidth (-3dB), Hz (Nominal) Transverse Axis Misalignment, ° Max. Output at Zero Tilt, Ma Zero Tilt Temp Sens, mA/°C Max. Resolution and Threshold, μ rad Max. ELECTRICAL Input Voltage, VDC Input Current (mA, Max.): Noise, mA rms Max. Operating Temp Range Survival Temp Range Vibration Shock Seal 1 - Full range is defined as...

Open the catalog to page 2